Samsung SNC-L200P manual Setting the Router or Wireless Router, Setting the Port Forwarding

Page 12

Single Use

Recommended System Specifications

- Computer : Pentium 4/1.5GHz or higher (Pentium 4/1GHz or higher at minimum)

-Operating System : Windows 2000/XP

-Ram : Memory : 256MB or higher

-Video : Memory : 128MB or higher

-Resolution : 1024 X 768 or higher

-Web Browser : Internet Explorer 6.0 or higher

-Video transmission may slow down depending on PC performance or network conditions.

-Do not enter the IP address and Mc address used for illustration in this manual.

Netcam(W)_SNC-L200(W)

Setting the Router or Wireless Router

If you want to connect the PC and the Netcam(W) with a single line of the Internet, you must have an IP router.

You are also required to set the IP router for normal operations.

Installing the IP Router of Wireless Router

Read the user ’s manual before installing the IP router.

-Set the IP address on the IP router.

-The IP address is used to set the network of the Netcam(W).Keep a record of the address for later use.

-The Subnet Mask or the Gateway status of the IP router connection is used to set the network of the Netcam(W). Keep a record of the status for later use.

-A wireless router is required for wireless communication of the NetcamW.

-The wireless information (SSID,WEP etc.)of the wireless router settings is used to set the wireless connection of the NetcamW. Keep a record of the information for later use.

Setting the Port Forwarding

The port forwarding is automatically set when the IP router

(router or wireless router)of the SNC Installer of the Netcam(W) supports UPnP. When the router does not support UPnP, you must set the port number allocated for the Netcam(W) by the IP router. Enter a value between 1 to 65535.

You must not use the following port numbers.

FTP : 21

Telnet : 23

SMTP (E-mail:) : 25

DNS : 53

POP3 : 110

HTTPS : 443

ICQ : 4000

IRC : 6661~6667

 

*It is recommended to set the number to higher than 10,000 since you can prevent collision with port numbers of other Internet service or programs by avoiding commonly used numbers.

IP routers that support UPnP are listed below.

-Netgear WGR614 v5, WGR614 v6

-D-Link DI-624, DI-624+, DI-624+A

-Zio WLB5054IP

23

Page 11 Page 13
Image 12
Page 11 Page 13
Contents NetcamW SNC-L200W Safety Precautions Important Safety InstructionsFeatures Before Using This Manual Contents Power InstallationStorage&Maintenance Power LED Title of Each ComponentList of Components Network LEDReset FlashPrivacy Distance and RangeConnection Internet ConnectionPower Connection Opening the Back Cover/Arranging CableInstalling the Camera LAN cable in direction aSee Hang the NetcamW onSetting the Router or Wireless Router Installing the IP Router of Wireless RouterSetting the Port Forwarding Installing the SNC Installer Click the Install ButtonSettings are not authorized during the installation process Close Button Closes the SNC Installer windowSearching the Connected NetcamW InternetSetting the Network Auto Setting the NetworkManually Setting the Network Click the ‘Yes ’ButtonUPnP by using the SNC Installer program Wireless Enable /Wireless Disable SNC-L200W Only ChooseYou can choose between Auto Local Setand Manual Set Manual Set ScreenPort Forwarding Search the set values again by Access to the NetcamW Website Access from a Local Network PCAccess from External Internet Installing the ActiveX Control For Windows 2000/Windows XPFor Windows XP Service Pack Manually Installing the Activex ControlUsing the Smart Viewer 12 13Record Button Record Video Record Stop Button Stop recordingPreset Passive Infrared PIR Select the Preset Number Click the Preset Operation ButtonCaptured images Using the Smart Viewer Using the Simple Player Record Moving ImagesPlay Back Recorded Files Change the Record RouteStop Recorded Files Print Playback ImagesCapture Playback Images Setting the Smart Viewer Click the Smart Setting Tab in the Smart Viewer ScreenPrint Button Print images Sub MenuSystem Configuration User Registration Network Configuration Ddns Configuration Set the DdnsAddress. typically Set the Adsl networkPort number used to access the NetcamW over the Internet Check the current connection status of the networkAddress PPPoE Status DisplayNetwork Status Notification Save Configuration Store Factory Default RestoreSystem Update Update Used to restore settings to factory defaultNormal Update Utilities Access to NetcamW via a cell phone USA Only 160x120 320x240 HelpInstalling the MultiViewer Program Multi UseRegistering the NetcamW Registering the NetcamWClick the MultiViewer Set Button Click the Delete Button Click the Yes ButtonConnecting the NetcamW Click the Yes Button when the message screen appearsUsing the MultiViewer MultiViewer ScreenView Multi Channel Sequence View Recording Video Repeat the and 2 to record another videoPress the Record Button Recording Motion Click the Motion area in the 16-split screenEnter the Sensitivity Value Click the Pretest ButtonRunning the SNC Installer Capturing VideoScreen Display Printing VideoYou can move to the image you want in Stop/Pause Mode Playing Back the MultiViewerReverse Playback Button Reverse-play back video Record File Playback Event Log InformationSetting the MultiViewer Setting the Viewer EnvironmentClick the Viewer Setup Tab Click the Close Button when the settings are completedSetting the Scheduled Recording Weight ServerCamera
Related manuals
Manual 245 pages 57.29 Kb Manual 35 pages 12.89 Kb Manual 35 pages 61.75 Kb Manual 35 pages 59.25 Kb

SNC-L200, SNC-L200P specifications

The Samsung SNC-L200P is an advanced security camera that combines high-performance features with cutting-edge technology to provide a reliable surveillance solution for various applications. Tailored for both indoor and outdoor environments, this camera delivers superior image quality, advanced analytics, and robust connectivity options.

One of the standout features of the SNC-L200P is its impressive image resolution. With a high-definition capability, the camera captures sharp, detailed footage under a variety of lighting conditions. This ensures that even the smallest details are visible, enhancing the overall effectiveness of your security monitoring. The camera is equipped with advanced low-light performance, allowing it to maintain clarity during nighttime or in dimly lit settings.

The SNC-L200P integrates intelligent video analytics, which enhances its surveillance capabilities. Features such as motion detection, intrusion detection, and line crossing detection provide additional security measures by alerting users to potential threats in real time. These analytics can be customized to suit specific monitoring needs, allowing for increased flexibility in security management.

Connectivity is another key characteristic of the SNC-L200P. The camera supports both wired and wireless connectivity options, making it easy to integrate into existing networks. This versatility ensures that users can deploy the camera in various locations without the constraints of traditional cabling.

Additionally, the camera is designed with user-friendly software that facilitates easy setup and configuration. The intuitive interface allows users to quickly adjust settings, view live feeds, and access recorded footage. Remote viewing capability ensures that users can monitor their property from anywhere using mobile devices or computers, providing peace of mind whether at home or on the go.

Durability is also a critical aspect of the SNC-L200P. Constructed with weather-resistant materials, the camera is well-suited for outdoor installations. This ensures reliable operation even in challenging environmental conditions, making it a robust choice for comprehensive security coverage.

Overall, the Samsung SNC-L200P stands out for its exceptional image quality, intelligent video analytics, flexible connectivity options, and durable design. It represents a powerful solution for both residential and commercial security needs, providing users with the tools necessary to ensure the safety and security of their premises.
Top Page Image Contents