Samsung SNC-L200P manual Server, Camera, Weight

Page 50

Video WEBcom_SNC-L200

Product Specifications

 

Communication mode

IEEE 802.11b

 

Frequency Range

2,412MHz ~ 2,462MHz(USA) / 2,412MHz ~ 2,472MHz(EU)

Wireless-

Channel

1 ~ 11(USA) / 1 ~ 13(EU)

Security

WEP (HEX/ASCII, 64/128bit)

NetcamW

Modulation Type

PLL

 

 

System

BPSK, QPSK, CCK

 

Oscillator Form

G1D

 

Image Compression

JPEG

 

Video Compression

MJPEG

Server

Video Resolution

640x480 / 320x240 / 160x120

 

Frame Rate

320x240: Max. 30Fps

 

640x480: Max. 15Fps

 

Upgrade

Ethernet connection

 

Remote Pan Angle

Maximum Left/Right 50°

 

Remote Tilt Angle

40° ~ + 10°

Camera

Maximum Pan/Tilt Speed

50°/sec

Image Sensor

1/4° 320,000Pixel CMOS

 

 

Focus

Fixed 1m - infinity

 

Flash LED

Range: 3m, Lux Value(1m): 8.0lux

 

PIR Sensor

Range: 3m, Left/Right 40°, Up/Down 85°

 

Network Connection

Ethernet 10/100Base-T

Interface

Network Service

Static IP, Cable Modem, ADSL, DHCP, Wireless Router

Network Protocol

TCP/IP, UDP, DHCP,

 

 

ARP, HTTP, Telnet, PPPoE, SMTP, FTP

 

 

 

Power

Power Adapter: 8.4V DC, 1A

 

Power Consumption: 5W (8.4V DC, 500mA)

 

 

Operating Temperature

-10°C ~ 50°C (Ω room temperature)

Dimensions (WxHxD)

105 x 75 x 48mm

 

Weight

400g

 

 

 

-The video signal transmission rate may be deteriorated due to crowded network traffic or poor PC performance.

-As the PIR sensor detects the temperature change based on the infrared

rays naturally emitted from a human being or an animal, such factors as the internal temperature, surroundings and neighboring heating/air-conditioning system may adversely affect its performance, resulting in an error or narrowed detection range.

-The effective radio transmission distance is about 100 -150 feet indoors.

The distance can be reduced in a place with a wall compartment or obstacle in the way.

98

Page 49 Page 50
Image 50
Page 49 Page 50
Contents NetcamW SNC-L200W Safety Precautions Important Safety InstructionsFeatures Before Using This Manual Contents Storage&Maintenance PowerInstallation List of Components Power LEDTitle of Each Component Network LEDPrivacy ResetFlash Distance and RangeConnection Internet ConnectionPower Connection Opening the Back Cover/Arranging CableSee Installing the CameraLAN cable in direction a Hang the NetcamW onSetting the Port Forwarding Setting the Router or Wireless RouterInstalling the IP Router of Wireless Router Installing the SNC Installer Click the Install ButtonSearching the Connected NetcamW Settings are not authorized during the installation processClose Button Closes the SNC Installer window InternetSetting the Network Auto Setting the NetworkManually Setting the Network Click the ‘Yes ’ButtonYou can choose between Auto Local Setand Manual Set UPnP by using the SNC Installer programWireless Enable /Wireless Disable SNC-L200W Only Choose Manual Set ScreenPort Forwarding Search the set values again by Access from External Internet Access to the NetcamW WebsiteAccess from a Local Network PC Installing the ActiveX Control For Windows 2000/Windows XPFor Windows XP Service Pack Manually Installing the Activex ControlRecord Button Record Video Using the Smart Viewer12 13 Record Stop Button Stop recordingCaptured images Preset Passive Infrared PIRSelect the Preset Number Click the Preset Operation Button Play Back Recorded Files Using the Smart Viewer Using the Simple PlayerRecord Moving Images Change the Record RouteCapture Playback Images Stop Recorded FilesPrint Playback Images Print Button Print images Setting the Smart ViewerClick the Smart Setting Tab in the Smart Viewer Screen Sub MenuSystem Configuration User Registration Network Configuration Ddns Configuration Set the DdnsAddress. typically Set the Adsl networkAddress Port number used to access the NetcamW over the InternetCheck the current connection status of the network PPPoE Status DisplayNetwork Status Notification System Update Update Save Configuration StoreFactory Default Restore Used to restore settings to factory defaultNormal Update Utilities Access to NetcamW via a cell phone USA Only 160x120 320x240 HelpInstalling the MultiViewer Program Multi UseClick the MultiViewer Set Button Registering the NetcamWRegistering the NetcamW Click the Delete Button Click the Yes ButtonConnecting the NetcamW Click the Yes Button when the message screen appearsUsing the MultiViewer MultiViewer ScreenView Multi Channel Press the Record Button Sequence View Recording VideoRepeat the and 2 to record another video Enter the Sensitivity Value Recording MotionClick the Motion area in the 16-split screen Click the Pretest ButtonScreen Display Running the SNC InstallerCapturing Video Printing VideoReverse Playback Button Reverse-play back video You can move to the image you want in Stop/Pause ModePlaying Back the MultiViewer Record File Playback Event Log InformationClick the Viewer Setup Tab Setting the MultiViewerSetting the Viewer Environment Click the Close Button when the settings are completedSetting the Scheduled Recording Camera WeightServer
Related manuals
Manual 245 pages 57.29 Kb Manual 35 pages 12.89 Kb Manual 35 pages 61.75 Kb Manual 35 pages 59.25 Kb

SNC-L200, SNC-L200P specifications

The Samsung SNC-L200P is an advanced security camera that combines high-performance features with cutting-edge technology to provide a reliable surveillance solution for various applications. Tailored for both indoor and outdoor environments, this camera delivers superior image quality, advanced analytics, and robust connectivity options.

One of the standout features of the SNC-L200P is its impressive image resolution. With a high-definition capability, the camera captures sharp, detailed footage under a variety of lighting conditions. This ensures that even the smallest details are visible, enhancing the overall effectiveness of your security monitoring. The camera is equipped with advanced low-light performance, allowing it to maintain clarity during nighttime or in dimly lit settings.

The SNC-L200P integrates intelligent video analytics, which enhances its surveillance capabilities. Features such as motion detection, intrusion detection, and line crossing detection provide additional security measures by alerting users to potential threats in real time. These analytics can be customized to suit specific monitoring needs, allowing for increased flexibility in security management.

Connectivity is another key characteristic of the SNC-L200P. The camera supports both wired and wireless connectivity options, making it easy to integrate into existing networks. This versatility ensures that users can deploy the camera in various locations without the constraints of traditional cabling.

Additionally, the camera is designed with user-friendly software that facilitates easy setup and configuration. The intuitive interface allows users to quickly adjust settings, view live feeds, and access recorded footage. Remote viewing capability ensures that users can monitor their property from anywhere using mobile devices or computers, providing peace of mind whether at home or on the go.

Durability is also a critical aspect of the SNC-L200P. Constructed with weather-resistant materials, the camera is well-suited for outdoor installations. This ensures reliable operation even in challenging environmental conditions, making it a robust choice for comprehensive security coverage.

Overall, the Samsung SNC-L200P stands out for its exceptional image quality, intelligent video analytics, flexible connectivity options, and durable design. It represents a powerful solution for both residential and commercial security needs, providing users with the tools necessary to ensure the safety and security of their premises.
Top Page Image Contents