Samsung SNC-L200P manual Flash, Privacy, Reset, Distance and Range

Page 8

Netcam(W)_SNC-L200(W)

Netcam(W)_SNC-L200(W)

Title of Each Component

Passive Infrared (PIR)Sensor

Detects and records motion of a human or an animal by using an infrared ray.

-Selects perform or cancel by using the PIR Sensor Button of Smart/Multi Viewer.

-Flash can be turned on in link with the PIR Sensor.

Range of detection left and right

Range of detection up and down

Distance and Range

Distance of Detection : Up to 3m

Range of detection (up and down) : Around 85°

Range of detection (left and right) : Around 40°

The left and right range of detection may change if motion is fast.

Avoid exposing this product to direct sunlight, air conditioner or heater, high or cold temperature, humidity, oil, smoke and glass when installing the product.

Warning The Sensor may malfunction.

Flash

You can monitor the environment even in a dark room by using flash.

-Turns on the flash by using the Flash button of the Smart/Multi Viewer.

-Flash can be turned on in link with the PIR Sensor.

-Flash is turned on for 5 seconds and off for 30 seconds.

Even i f you click the Flash Button in 30 seconds, flash is not turned on.

-Flash is also turned on for 5 seconds and off for 30 seconds when using the PIR Sensor.

Privacy

Turns the lens out of the performance range to prevent shooting for privacy.

Press the Privacy Button.

-Every time you press the button, [the lens moves out of

the performance range ‘Privacy Mode’ is displayed

and video is not transmitted restore to the previous state ] process is repeated.

Reset

When the product is not in normal conditions, you can set the values to factory default.

Press the Reset Button on the back for more than 5 seconds.

- Refer to the title of each component for the location of the Reset Button (page 12).

-All the values are restored to factory default settings, and the system is rebooted. Use the product after some 2 minutes.

Do not use this function unless necessary.

Stored values such as the network settings, registered users,

Range of light emitting left and right

Range of light emitting up and down

Distance and Range

Distance of Light Emitting : Up to 3m

Range of detection (up and down) : Around 67°

Range of detection (left and right) : Around 67°

the title of the Netcam(W), firmware upgrades are all switched to Warning factory default settings.

14

15

Page 7 Page 9
Image 8
Page 7 Page 9
Contents NetcamW SNC-L200W Safety Precautions Important Safety InstructionsFeatures Before Using This Manual Contents Storage&Maintenance PowerInstallation Power LED Title of Each ComponentList of Components Network LEDReset FlashPrivacy Distance and RangeConnection Internet ConnectionPower Connection Opening the Back Cover/Arranging CableInstalling the Camera LAN cable in direction aSee Hang the NetcamW onSetting the Port Forwarding Setting the Router or Wireless RouterInstalling the IP Router of Wireless Router Installing the SNC Installer Click the Install ButtonSettings are not authorized during the installation process Close Button Closes the SNC Installer windowSearching the Connected NetcamW InternetSetting the Network Auto Setting the NetworkManually Setting the Network Click the ‘Yes ’ButtonUPnP by using the SNC Installer program Wireless Enable /Wireless Disable SNC-L200W Only ChooseYou can choose between Auto Local Setand Manual Set Manual Set ScreenPort Forwarding Search the set values again by Access from External Internet Access to the NetcamW WebsiteAccess from a Local Network PC Installing the ActiveX Control For Windows 2000/Windows XPFor Windows XP Service Pack Manually Installing the Activex ControlUsing the Smart Viewer 12 13Record Button Record Video Record Stop Button Stop recordingCaptured images Preset Passive Infrared PIRSelect the Preset Number Click the Preset Operation Button Using the Smart Viewer Using the Simple Player Record Moving ImagesPlay Back Recorded Files Change the Record RouteCapture Playback Images Stop Recorded FilesPrint Playback Images Setting the Smart Viewer Click the Smart Setting Tab in the Smart Viewer ScreenPrint Button Print images Sub MenuSystem Configuration User Registration Network Configuration Ddns Configuration Set the DdnsAddress. typically Set the Adsl networkPort number used to access the NetcamW over the Internet Check the current connection status of the networkAddress PPPoE Status DisplayNetwork Status Notification Save Configuration Store Factory Default RestoreSystem Update Update Used to restore settings to factory defaultNormal Update Utilities Access to NetcamW via a cell phone USA Only 160x120 320x240 HelpInstalling the MultiViewer Program Multi UseRegistering the NetcamW Registering the NetcamWClick the MultiViewer Set Button Click the Delete Button Click the Yes ButtonConnecting the NetcamW Click the Yes Button when the message screen appearsUsing the MultiViewer MultiViewer ScreenView Multi Channel Press the Record Button Sequence View Recording VideoRepeat the and 2 to record another video Recording Motion Click the Motion area in the 16-split screenEnter the Sensitivity Value Click the Pretest ButtonRunning the SNC Installer Capturing VideoScreen Display Printing VideoReverse Playback Button Reverse-play back video You can move to the image you want in Stop/Pause ModePlaying Back the MultiViewer Record File Playback Event Log InformationSetting the MultiViewer Setting the Viewer EnvironmentClick the Viewer Setup Tab Click the Close Button when the settings are completedSetting the Scheduled Recording Camera WeightServer
Related manuals
Manual 245 pages 57.29 Kb Manual 35 pages 12.89 Kb Manual 35 pages 61.75 Kb Manual 35 pages 59.25 Kb

SNC-L200, SNC-L200P specifications

The Samsung SNC-L200P is an advanced security camera that combines high-performance features with cutting-edge technology to provide a reliable surveillance solution for various applications. Tailored for both indoor and outdoor environments, this camera delivers superior image quality, advanced analytics, and robust connectivity options.

One of the standout features of the SNC-L200P is its impressive image resolution. With a high-definition capability, the camera captures sharp, detailed footage under a variety of lighting conditions. This ensures that even the smallest details are visible, enhancing the overall effectiveness of your security monitoring. The camera is equipped with advanced low-light performance, allowing it to maintain clarity during nighttime or in dimly lit settings.

The SNC-L200P integrates intelligent video analytics, which enhances its surveillance capabilities. Features such as motion detection, intrusion detection, and line crossing detection provide additional security measures by alerting users to potential threats in real time. These analytics can be customized to suit specific monitoring needs, allowing for increased flexibility in security management.

Connectivity is another key characteristic of the SNC-L200P. The camera supports both wired and wireless connectivity options, making it easy to integrate into existing networks. This versatility ensures that users can deploy the camera in various locations without the constraints of traditional cabling.

Additionally, the camera is designed with user-friendly software that facilitates easy setup and configuration. The intuitive interface allows users to quickly adjust settings, view live feeds, and access recorded footage. Remote viewing capability ensures that users can monitor their property from anywhere using mobile devices or computers, providing peace of mind whether at home or on the go.

Durability is also a critical aspect of the SNC-L200P. Constructed with weather-resistant materials, the camera is well-suited for outdoor installations. This ensures reliable operation even in challenging environmental conditions, making it a robust choice for comprehensive security coverage.

Overall, the Samsung SNC-L200P stands out for its exceptional image quality, intelligent video analytics, flexible connectivity options, and durable design. It represents a powerful solution for both residential and commercial security needs, providing users with the tools necessary to ensure the safety and security of their premises.
Top Page Image Contents