AUTO
SOURCE POWER SPEAKER TV SOURCE
SoundShare
TV VOL | TV CH | AUDIO SYNC | ||||
|
|
|
|
|
|
|
MUTE
LEVELLEVEL
3D SOUND | VOL |
DRC | |
PLUS |
|
AUTO
SOURCE POWER SPEAKER TV SOURCE
SoundShare
REPEAT
Using the AUTO POWER LINK function
The Crystal Surround Air Track is automatically turned on when you turn on the TV or any device connected to the Air Track with the optical cable.
Press AUTO POWER on the remote control of this unit.
•The Auto power link function turns on and off each time you press AUTO
POWER.
AUTO POWER LINK | Display |
ON | POWER LINK ON |
OFF | POWER LINK OFF |
▪ If a TV or any device connected to Air Track with the optical cable is off and there is no digital input, the Air Track is turned off after 20 minutes.
▪These functions are available only when Anynet+
Using the AUDIO SYNC function
Video may appear out of synch with the audio if the Air Track is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.
Press AUDIO SYNC
•You can use the + , - buttons to set the audio delay time between 0 ms and 300 ms.
▪ In USB mode, TV mode or BT mode, the Audio Sync function may not work.
Using the DRC function
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Press DRC on the remote control of this unit.
•Each time the button is pressed, the selection changes as follows :
DRC STANDARD ➡ DRC MAX ➡ DRC MIN
SPEAKER button
If the TV and Air Track are connected via HDMI, this button lets you select between listening to audio through your TV or through the Air Track.
Press SPEAKER on the remote control of this unit.
AUDIO MODE | SPEAKER | Scroll Display | Display | |
HDMI IN | TV | TV SPEAKER | TV SPK | |
Air Track | AVR SPEAKER | HDMI | ||
| ||||
ARC | TV | TV SPEAKER | S MUTE | |
Air Track | AVR SPEAKER | TV ARC | ||
|
ENG
●FUNCTIONS
21