Samsung HW-H7501/ZF, HW-H7500/EN, HW-H7501/EN, HW-H7500/TK, HW-H7500/ZF TV-MOUNTED Installation

INSTALLATION

INSTALLATION

● This Soundbar can be compatible with 2014 HU7, HU8 and HU9 series of Samsung UHD curved TVs (except HU7100 models). For a detailed list of compatible TV models, please refer to the Samsung web site.

TV-MOUNTED INSTALLATION

For a TV-mounted installation with a physically compatible, wall-mountedSamsung TV.

NOT recommended for installation on curved TVs 78" or larger.



● The TV-mounted installation is for compatible wall-mounted Samsung TVs only and requires that you remove the TV's stand. If you remove the TV's stand and replace it with the Curved Soundbar, and then stand the TV on a flat surface, the TV may tip over.

●Do not place objects on top of the Soundbar if it is TV mounted.

1.Place the Soundbar as shown in the illustration, ensuring that none of its buttons touch the surface it is lying on.

2.If the Holder-Footis attached, remove it first to install the TV-Mount.

3.Fasten the four Holder-Screws 1 and four of the Holder-Screws 2 to the four holes in the Soundbar, as shown in the illustration.

4.Place the TV screen-side down on the curved packaging foam that came with the TV.

● Do not place the TV screen-side down on a flat surface. You can crack the panel.

5.Remove the TV's stand if the stand is attached, and then insert the bracket guide into the notches on the bottom of the TV. Make sure the screw holes in the Bracket-Mountline up with the screw holes in the TV.