Samsung MM-DC10R/ELS manual Sound Field DSP/EQ Function

Sound Field (DSP)/EQ Function

DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments. EQ: You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing

Setting the Clock GB

For each step, you have a few seconds to set the required options.

If you exceed this time, you must start again.

Press DSP/EQ button.

• "DSP" appears on the display panel.

• Each time the button is pressed, the selection changes as follows:

Switch the system

1 on by pressing POWER button.

When the correct

4 hour is displayed, press ENTER. The minutes flash.

•Increase the minutes :

•Decrease the minutes :

Press

2 TIMER/CLOCK

twice.

•CLOCK is displayed.

When the correct

5 time is displayed, press ENTER.

•"TIMER" appears in the display.

•The current time is now set.

3 Press ENTER. The hour flashes.

•Increase the hours :

•Decrease the hours :

SETUP

Note	• DSP/EQ function is only available in STEREO mode.
	• This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and
	Dolby Digital discs.
	• When playing a DVD disc encoded with two or more channels,
	multi-channel mode will be selected automatically and DSP/EQ function
	does not work.

POPS, JAZZ, ROCK: Depending on the genre of music, you can select POP, JAZZ, and ROCK.

STUDIO : Provides a sense of presence as if in a studio.

CLUB : Simulates the sound of a dance club with a throbbing bass beat.

HALL : Provides a clear vocal as if listening in a concert hall.

MOVIE: Provides the feeling of a movie theater.

CHURCH: Gives the feel of being in a grand church.

45 PASS: Select this for normal listening.

Note

•You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

46