Listening to Radio, Presetting Stations

Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.

Presetting Stations

You can store up to:

15	FM stations	• FM	Frequency Modulation
15	AM stations	• AM	Medium Wave

Remote Control Unit

Example: Presetting FM 89.1 in the memory

1 Press TUNER/

BAND button.

•The selection toggles back and forth between "FM ➝ AM" each time the TUNER(BAND) button is pressed.

2 Tune in to the desired station.

Automatic Tuning 1	Press	button to

	select the preset station.

	Press and hold TUNING
Automatic Tuning 2
	button to automatically

search the band.

Manual Tuning Briefly press TUNING

button to increase or decrease the frequency incrementally.

1Press the TUNER/ BAND button and select the FM band.

•Each time the button is pressed, the band switches between "FM ➝ AM".

kHz MHz

Press TUNING to	Press the TUNER
2 select "89.10".	3 MEMORY button.
• Refer to Step 2 on page 49 to	• “PROGRAM” flashes in the
automatically or manually tune in	display.
to a station.
	PROGRAM
kHz	kHz
MHz	MHz

Main Unit

Press the TUNER

1button to select the desired band (FM, AM).

2 Select a broadcast station.


Automatic Tuning	Press the STOP (			)


	button to select PRESET
	button to select PRESET
	and then press and hold
		button to select
		button to select
	the preset station.
	Press STOP (		) to select
Manual Tuning


	MANUAL and then briefly
	MANUAL and then briefly
	press		to tune in
	press		to tune in
	to a lower or higher
	frequency.

Press to

4 select preset number.

•You can select between 1 and 15.

PROGRAM

kHz MHz

5	Press the TUNER	6	To preset another
	MEMORY button		station, repeat
	again.		steps 2 to 5.

•Press the MEMORY button before

‘PROGRAM’ disappears from the display.

•‘PROGRAM’ disappears from the display and the station is stored in memory.

kHz MHz

RADIO OPERATION

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

49	•	Each time the button is pressed, the sound switches between "STEREO" and "MONO".
	•	In a poor reception area, select MONO for a clear, interference-free broadcast.

To tune in to a preset station, press on the remote control to select a channel.