Samsung MM-DC10R/ELS manual Timer Function

Timer Function

The timer enables you to switch the system on or off at specific times.

Example: You wish to wake up to music every morning.

GB

Switch the system	2	Press TIMER/
		CLOCK until
on by pressing
1 POWER.		TIMER is
		displayed.

	Press or
Set the timer	button to adjust
5 switch-off time.	6 the volume level

and press ENTER.

Press or button to select the source

7 to be played when the system switches on.

a. Set the hour by pressing or button.

b. Press ENTER.

•The minutes flash.

c.Set the minutes by pressing or button.

d.Press ENTER.

•VOL 20 is displayed, where 10 corresponds to the volume already set.

•The source to be selected is displayed.

•USB : Connect a USB cable.

•TUNER (FM, AM) : a Press ENTER.

b Select a preset station by pressing Tuning or .

•DVD/CD : Load a compact disc.

SETUP

3 Press the ENTER button.

•ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

4 Set the timer switch-on time.

a. Set the hour by pressing or button.

b. Press ENTER.

• The minutes flash.

c. Set the minutes by pressing or

button.

d. Press ENTER.

• OFF TIME is displayed (instead

of the equalizer symbols) for a few

8 Press ENTER to confirm the timer.

Press POWER to

9 set the system to standby mode.

• is displayed to the top-right of the time, indicating that the timer has been set.

•The system will switch on and off automatically at the required times.

seconds, followed by any switch-

off time already set; you can now

set the timer switch-off time.

Note	•	If the timer switch on and off times are identical, the word ERROR is displayed.
	•	If you no longer want the system to be switched on or off automatically, you must cancel the timer.
	•	Before setting the timer, check that the current time is correct.
	•	For each step, you have a few seconds to set the required options.
	•	If you exceed this time, you must start again.
		In standby mode, you can press MULTI JOG(PUSH ENTER) button instead of ENTER button and press
		buttons or turn MULTI JOG(PUSH ENTER) knob on the front panel instead of	,	buttons on the remote control
		in step 4,5,6,7.

47 48