Programming the Order of CD Playback
(This function is not available during playback of an
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function.
1 | If the CD function is selected, stop the player by pressing |
| . |
| |||
| |||
2 | Load the selected CDs. |
|
|
3 | Press PROGRAM. |
|
|
| Result: The following indications are displayed: |
|
|
(01 = Program no., PR1 = Disc no., – – = Track no. on the disc)
4 | If necessary, select the disc containing the required track by pressing | |||||
| the corresponding DISC (1, 2, 3) button. | |||||
5 | Select the required track by turning the MULTI JOG knob: | |||||
| To the left to move back through the tracks | |||||
| To the right to move forward through the tracks | |||||
6 | Press PROGRAM to confirm your selection. | |||||
| Result: The selection is stored and | is displayed. | ||||
7 | To select other tracks, repeat Steps 4 to 6. | |||||
8 | Press CD ( |
|
|
| ) to listen to the track selection in the order | |
|
|
| ||||
|
| |||||
| programmed. |
|
|
|
|
|
9 |
|
|
|
|
|
|
To... |
|
|
|
| Turn the MULTI JOG knob... |
GB
| 4 | |
8 |
| |
3,6 | 5,9 | |
1,10 | ||
|
Listen to the current track again Listen to the previous track Listen to the next track
Skip forwards or backwards one or more tracks
10 To cancel the selection, press .
One notch to the left Two notches to the left One notch to the right The appropriate number of notches to the right or to the left
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track.
You can also use the / buttons to select the required tracks in step 5, 9.
You can also use the PROGRAM/SET button on the remote control to instead PROGRAM button on the front panel in step 3, 6.
15