Searching for and Storing the Radio Stations (continued)
GB
7 If you do not want to store the radio station found, revert to Step 4 and search for another station.
Otherwise:
aPress Memory.
Result: The PRGM is displayed for a few seconds.
bPress Tuning Down and Up to assign a programme number between 1 and 15.
cPress Memory to store the radio station.
Result: PRGM is no longer displayed and the station is stored.
8 To store any other radio frequencies required, repeat Steps 3 to 7.
The PROGRAM function can be used to assign a new station to an existing programme number.
7 |
|
7 | 7 |
Selecting a Stored Station
You can listen to a stored radio station as follows:
1 Switch the system on by pressing Standby/on.
2 Select the TUNER function by pressing Tuner .
3 Select the required frequency band by pressing Tuner (Band) on the remote control or TUNER (Band) again on the front panel.
4 Press 
/ 
button on the front panel of the unit, or the Tuning Mode button on the remote control until “PRESET” is displayed.
5 Press | / | on the front panel of the unit to select the desired |
station. |
|
|
or
Select the desired station by pressing the station number stored,
using the Tuning 
or 
button on the remote control. Result: The desired station is now received.
1
4,5 | 4 | 4,5 |
2,3
In Tuner Mode
In manual tuning mode, you can use 
/ 
button to manual search a radio station.
During Tuner auto searching, press 
button to stop auto search- ing.
In Preset tuning mode, you can use 
/ 
button to search a stored radio station.
you can use Program /Set button on the remote control to instead Memory button in step 7.
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them permanently
If reception from a specific FM radio station is poor, press Mono/ST. on the remote control to switch from stereo mode to mono. The quali- ty of the sound will be improved.
14