Samsung MAXS530RH/XEF Timer Function, Press Timer/Clock until, You must also, Press Enter

Timer Function

The timer enables you to switch the system on or off at spe- cific times.

Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off auto- matically, you must cancel the timer.

Before setting the timer, check that the current time is cor- rect.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing Standby/On.
2	Press Timer/Clock until	TIMER is displayed.
3	Press Enter.

Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

4 Set the timer switch-on time.

aSet the hour by pressing the / buttons.

bPress Enter.

Result: The minutes flash.

cSet the minutes by pressing the / buttons.

dPress Enter.

Result: OFF TIME is displayed (instead of the equalizer sym- bols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

5 Set the timer switch-off time.

aSet the hour by pressing the / buttons.

bPress Enter.

Result: The minutes flash.

cSet the minutes by pressing the / buttons.

dPress Enter.

Result: VOL XX is displayed, where XX corresponds to the vol- ume already set.

6 Press Tuning Down and Up to adjust the volume level and press

Enter.

Result: The source to be selected is displayed.

7 pressing the		/	buttons to select the source to be played
	when the system switches on .
	If you select...		You must also...
	TAPE (cassette)		Insert a recorded cassette in one of the
			decks before setting the system to stand-
			by.
	TUNER (radio)		a Press Enter.

bSelect a preset station by pressing the

/ buttons.

	CD (compact disc)		Load one or more compact discs.
8	Press Enter to confirm the timer.
9	Press Standby/On to set the system to standby mode.
	Result:	appears on the front panel display next to the time, indi-

cating the timer has been set. The timer automatically turns the system on or off at a designated time.

GB

If the timer switch on and off times are identical, the word ERROR is displayed.

1,9

2

3,4,5,6,7,8

4,5,6,7

4,5,6,7

To set the timer function

You can also use Program/Set button on the remote control to instead Enter button in step 3,4,5,6,7,8.

19