Samsung MM-C8R/ELS Listening to a Cassette, Selecting the Cassette Playback Mode, Tape Counter

Listening to a Cassette

B

Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes”

on page 24.

1	Switch the system on by pressing (						).
2	Open the cassette deck by pushing on the corner of the cover
	marked PUSH EJECT (				) until you hear a click and then releasing it.
	Insert the pre-recorded cassette with the open edge of the tape
	facing downwards.
3	Close the deck by pushing on it until it clicks into place.
4
	To listen to...						Press ...
	Side A						Tape (	) button once.
	Side B						Tape (	) button twice.
	Result: The cassette starts playing.
5	Press the	,	or	,		button if necessary.
	To...						Press ...

Rewind the cassette / button.

Fast-forward the cassette / button.

6 When you have finished playback, press button.

	1
	4
5	6
	5

2,3

Selecting the Cassette

Playback Mode

Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically.

Press REV.MODE until the appropriate symbol is displayed.

When the display indicates... The micro component system plays

back...

One side of the selected cassette and then stops.

One side of the cassette.

The other side of the cassette and then stops.

Both sides of the cassette indefinitely until you press stop.

AUX	PROGRAM/SET	COUNTER RESET
			MO/ST
SLEEP	REC./PAUSE		SURROUND XT
REV.MODE	DISPLAY	RDS	PTY

CD/MP3-CD

TUNING/

VOLUMEALBUM

TUNING

REPEAT MODE

+10

Tape Counter

When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus start playback at the beginning of the track to which you wish to listen.

The counter is only displayed when a cassette is being played.

Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing COUNTER RESET.

		MUTE
TUNER	TIMER/CLOCK	TIMER ON/OFF
BAND
AUX	PROGRAM/SET	COUNTER RESET
		MO/ST
SLEEP	REC./PAUSE	SURROUND
REV.MODE	DISPLAY	RDS PTY

CD/MP3-CD

Recording a Compact Disc

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

Synchronised recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing (					) .
2	Insert a blank cassette in Deck.
	Press the PUSH/EJECT button (				) to open the cassette door,
	insert a cassette, and then close the cassette door.
	Insert the cassette with the safety tabs.
3	Load a compact disc.
	Press the OPEN/CLOSE button (				) to open the CD door.
	Insert a CD and press the OPEN/CLOSE button (						) to close
	the CD door.
4	Press the MP3-CD/CD(√/») button.
5	Use the CD selection (		,	) buttons to select the desired song.
	Press and hold CD SYNC/REC/PAUSE button.
	When stopped, press the button to start the recording from the
	first piece of music.
	Press and hold CD SYNC/REC/PAUSE button during the play-
	back of CD to start the recording from the first part of the music
	being played.
6 To stop recording, press		button.

		2
1
4
4		5
6	4	3

Direct recording

The direct recording mode enables you to start recording

with any track on the compact disc.

You do not need to adjust the volume, as it has no effect on the recording.

1 Switch the system on by pressing ( ) .

2 Insert a blank cassette in Deck.

Press the PUSH/EJECT button ( ) to open the cassette door, insert a cassette, and then close the cassette door.

Insert the cassette with the safety tabs.

GB

3 Load a compact disc.

Press the OPEN/CLOSE button ( ) to open the CD door.

Insert a CD and press the OPEN/CLOSE button ( ) to close the CD door.

4	Press the MP3-CD/CD(√/») button.
5	Use the CD selection (	,	) buttons to select the desired song.
	Press the CD SYNC/REC/PAUSE button.
	Result: Recording will begin.

To stop recording, press button.

		2
1
4
4		5
5	4	3

Recording a Radio Program

You can record a radio program of your choice.

You do not need to adjust the volume, as it has no effect on

the recording.

1	Switch the system on by pressing (			) .
2	Insert a blank cassette in Deck.
3	Select the TUNER function by pressing TUNER/BAND.
4	Select the radio station that you wish to record by pressing
		or	button .

5 Press the CD SYNC/REC/PAUSE button. Result: REC is displayed and recording starts.

6 To stop recording, press button.

	1
	3
	6
4	5
	4

18

19