Samsung MM-C8R/ELS, MM-C8Q/XFO manual Mute Function, Connecting Headphones, Safety Precautions

MUTE Function

B

You can turn the sound off temporarily on your system.

Example: You wish to answer a telephone call.

1	Press MUTE ( ).
2	To switch the sound back on (at the same volume as before), press
	MUTE again or the VOLUME buttons.

		MUTE
TUNER	TIMER/CLOCK	TIMER ON/OFF

Connecting Headphones

You can connect a set of headphones to your micro component system so that you can listen to music or radio programmers without disturbing other people in the room. The earphones must have a 3.5ø jack or an appropriate adapter.

Connect the headphones to the PHONES jack on the front panel. Result: The loudspeakers are no longer used to output the sound.

Prolonged use of headphones at a high volume may damage your hearing.

Safety Precautions

The following diagrams illustrate the precautions to be taken

when using or moving your micro component system.

Ambient operating conditions:		Do not expose the unit to direct sun
Ambient temperature	5°C-35°C	radiation or other heat sources.
Humidity	10-75%	This could lead to overheating and
		malfunction of the unit.

Cleaning Your Micro Component

System

GB

To obtain the best possible results from your micro compo- nent system, you must clean the following elements regularly:

The outer casing

The compact disc player

The cassette players (heads, rollers and drive capstans)

Always unplug the system from the wall outlet:

Before cleaning it

If you are not going to be using it for a long time

Outer Casing

Clean the outer casing regularly using a soft cloth and a light detergent. Do not use abrasive powders, liquids or aerosol cleaners. Never let any liquids get into the system.

Compact Disc Player

1 Before playing a compact disc, clean it with a special CD cleaning agent. Do not use the same cleaning agents as for vinyl LP records. Carefully wipe the disc from the centre outward.

BAND
AUX	PROGRAM/SET COUNTER RESET

MO/ST

Setting the System to Switch off Automatically

While listening to a compact disc or a cassette, you can set the system to switch off automatically

Example: You wish to go to sleep to music.

1 Press SLEEP or MULTI JOG(PUSH ENTER) button until the option is selected .

Result: The following indications are displayed:

90

2MIN

Press SLEEP one or more times or turn MULTI JOG(PUSH ENTER) knob to indicate how long the system should continue playing before it switches off:

Do not place potted plants or vases on top of the unit. Moisture entering the unit could lead to dangerous electric shock and can cause equipment damage. In such events immediately disconnect the main plug from the socket.

2	Regularly clean the player with a special cleaning disc (available from
	your local dealer).
Tape Decks
1	Press PUSH EJECT(	) to open the cassette deck.
2	Use a cotton bud and a special cassette cleaning agent to clean the:
	Head (1)
	Rollers (2)

During thunderstorms, disconnect

the main plug from the socket.Drive capstans (3) Main voltage peaks due to light-

ning could damage the unit.

3

90 MIN 60 MIN 45 MIN

OFF SLEEP 15 MIN30 MIN

At any time, you can:

Check the remaining time by pressing SLEEPor MULTI

JOG(PUSH ENTER).

Change the remaining time by repeating Steps 1 and 2.

3 To cancel SLEEP function, press SLEEP or turn MULTI JOG(PUSH ENTER) knob one or more times until OFF is display.

AUX	PROGRAM/SET	COUNTER RESET
			MO/ST
SLEEP	REC./PAUSE	SURROUND XT
.MODE	DISPLAY	RDS	PTY

	VOLUME
	UP
	DOWN
Remove the batteries from the	When using headphones, take care
remote control, if not used for any	not to listen at excessive volumes.
extended period.	Extended use of headphones at
Leaking batteries can cause serious	high volumes will lead to hearing
damage to the remote control.	damage.

1 2

If you will not be using the remote control for a long time, remove the batteries to prevent corrosion.

Although your system is very hard-wearing, it should not be used in an excessively dusty environment or subjected to shocks or extreme heat (close to heating appliances or in direct sunlight, etc.).

If the unit emits an unpleasant odor when in use, unplug it from the main supply and contact the after-sales service.

22

Do not place heavy items on the	Do not remove any equipment panels.
main lead. Main cable damage can	The inside of the unit
lead to damage of the equipment (fire	contains live components, which
hazard) and can cause electric	cause electric shock.
shock.

23