Fix the Back Plate to the Wall Mounted Adaptor using six
4 screws (M3 x L6). (Taking care that the gasket remains in contact with the Wall Mounted Adaptor.)
Back Plate
Gasket
Wall Mount Adaptor
5 | Securely fasten the Wall Mounted Adaptor to the wall using |
the anchor bolts/nuts. |
Separate the dummy plate from
6 the housing top by removing the two screws and attach the waterproofing gasket.
(When attaching the gasket, take care to align the guiding bosses correctly with the holes in the housing.)
Align the Wall Mounted Adaptor
7 bosses with the Housing holes and assemble the Housing to the Adaptor using four screws
(BH M4 x L22).
Gasket attachment after separating Dummy Plate
Screw (BH M4 X L22)
Wall Mount
Adaptor
Boss
Gasket
Dummy Plate
GB
8 | Install the Housing in accordance with the Housing |
installation manual. | |
9 | After installing the adaptor, apply silicon sealant around the |
adaptor and between the adaptor and the wall for water |
tightness.
If the wall surface is uneven, pay particular attention that no gaps are left.
3 | 4 |