Samsung SMO-120P DATE/TIME Menu Function setting, Dwell Time Menu function setting, English-34

3-2) DATE/TIME MENU Function setting

•Function: Sets the display date format and current time.

•Setting method :Move to #2. DATE/TIME MENU by using œENTER√ SWITCH at setup menu, then press the ENTER SWITCH to display the OSD as shown in the below figure. (The figure shows the initial setting status.)

06/01/03		13:14:00
	DATE/TIME SETTING
	DATE TYPE	MM/DD/YY
	DATE	06 / 01 / 03
	TIME [HH:MM:SS]	13 : 14 : 00

•Setting method of date display format

Move to the format item by turning œENTER√ SWITCH, and enter the mode for setting date format by pressing the ENTER SWITCH.

At this time, select a target date format by turning left and right the SWITCH. (“YY/MM/DD”, “MM/DD/YY”, “DD/MM/YY” are available for selectable data format.)

•Date and current time setting method

Repeat the above instruction for moving to each item (MONTH, DAY, YEAR, HOUR, MINUTE, SECOND) and entering the mode. Current date and time to display can be set. (It can be referred when ALARM or LOSS occurs.)

3-3) DWELL TIME MENU function setting

•Function : Displays each picture for pre-set time and automatically switches it to the next picture at SEQUENTIAL DISPLAY MODE.

•Setting method :Move to #3. DWELL TIME menu by using œENTER√ SWITCH at SETUP MENU, and press the ENTER SWITCH to display the following OSD as shown

in the below figure. (The figure shows the initial setting status.)

06/01/03		13:14:00
	DWELL TIME SETTING
	CAM1	01 SEC
	CAM2	01 SEC
	CAM3	01 SEC
	CAM4	01 SEC
	CAM5	01 SEC
	CAM6	01 SEC
	CAM7	01 SEC
	CAM8	01 SEC
	QUAD-A	01 SEC
	QUAD-B	01 SEC

If the time is set for each camera channel by using œENTER√ SWITCH, each camera picture will be displayed for the set time and switched to the next picture automatically.

English-34