4-5) ZOOM MODE DISPLAY
When users want to see zoomed image of a specific area of the display, press the ZOOM KEY in the front to display zoom selection area. Select zoom target area by turning œENTER√ SWITCH left and right, and press the ENTER SWITCH, then, the selected area will be displayed at full single mode with zoomed area doubled. At zoom function operation at SINGLE DISPLAY MODE (CH2), the operation will be carried out as shown in figure below. (Zoom selection areas at SINGLE DISPLAY MODE are nine.)
06/01/0313:14:0006/01/0313:14:00
| ➯ |
|
|
|
|
|
|
| |
| Press ZOOM |
|
|
|
CH2 | KEY |
| CH2 | |
|
| |||
CH2 SINGLE DISPLAY |
| ZOOM area is activated. | ||
|
|
| ➯ | |
06/01/03 | 13:14:00 | 06/01/03 |
13:14:00
| ➯ |
|
| Press |
|
| œENTER√ | CH2 |
| SWITCH | |
|
| |
The selected area will be doubled |
| Turn œENTER√ SWITCH and |
and at FULL DISPLAY. |
| |
| move to desired location |