Installing on adaptors (sold separately,
1.Separate the dome cover and case.
For separating dome cover and case, refer to the steps 1 and 2 of “Installing on the ceiling directly”.
2.Assemble and secure the case and adaptor (sold separately) using 4 fi xing screws (BH, M4xL8, provided).
3.Connect power and video cables and arrange cable running not to damage or squeeze them, and assemble the camera unit in the reverse way.
4.Assemble the Dome Cover.
Refer tot the step 6 of “Installing on the ceiling directly".
Connecting additional alarm cables
1.Separate the dome cover and case to connect alarm cable.
For separating dome cover and case, refer to the steps 1 and 2 of “Installing on the ceiling directly”.
2.Tear off the long rubber plug as illustrated in the fi gure.
3.Through the hole opened in step 2 by tearing the plug off, insert the alarm cable and connect it to the alarm terminal of the PCB.
4.Assemble the camera module and the case. Refer tot the step 4 of “Installing on the ceiling directly".
5.Adjust the lens aiming to your desired direction and assemble the dome cover.
● INSTALLATION & CONNECTION