setup screen
To update the software
Select <System> - <Software update>.
The Software update window appears.
How to update the software
1.From the software update window, click [Browse…].
The Open dialog appears.
2.Select an updatable fi le and click [Open].
3.From the software update window, click [Install].
The selected fi le will be unzipped with a start of the update.
It may take a several minutes to complete the update.
4.When the software update is completed, you will be prompted to restart the system.
5.Click [OK] to restart the system.
Since the current connection is disconnected, you have to connect to the system again.
J If the network is disconnected, the power supply fails, or the PC abnormally operates during the update, the system does not work at all.
To reset the system
Restart or reset the system if it does not work properly or causes a problem.
Select <System> - <Reset>.
The Reset window appears.
yRestart : Restarts the system.
yFactory default : Resets the system settings to the factory defaults with following two options:
-Except network parameter : Resets all settings except for the Network Parameters.
-All : Restores all settings to the default.
Initializes to the factory defaults, which functions the same to that of pressing the [RESET] button inside the main unit.