Samsung SVR960PRT manual Troubleshootingcont.D, 19~20

TROUBLESHOOTING(CONT.D)

TROUBLESHOOTING (CONT'D)

The picture quality is poor with a lot of noise

•Check to see whether the tape is recorded by another VCR.

• Check to see
		whether the
•	Press the "TRACKING"		head is dirty.
			button on the
	of the			front panel
		video for adjustment
	using the cleaning tape.			or clean the head

	Won't Eject
• Press power button		then eject		button after VCR
first	turns on.		the programmed		recording	is
• Check to see whether
set.

Trouble	Checks and adjustments
The tape cannot be inserted.	• Check to see whether the power plug is inserted into
	the wall outlet.
	• Check to see whether the tape has already been
	inserted.
	• Insert the tape with the tape window facing up. (Refer to
	page 21).
The tape cannot be ejected.	• Check the power is turned on. If it is turned off, press
	the POWER button, and then press the eject button.
No program recording.	• Check to see whether the program recording input is
	properly set.
	• Check to see whether the current time is properly set.
	• Check to see whether the power is turned off.
	• Check to see whether the	is turned on the display.
No editing with other equipment.	• Check to see whether proper connections are made.
The record button does	• Check for reserved recording. You need to press the
not function.	power button only.
	• The button cannot be pressed when the REC LOCK
	switch is "ON". (If you want to enter the button place the
	REC LOCK switch in the "OFF", and then press the
	button.
Playback picture is noisy.	• Press the "TRACKING" button for adjustment. If there is

			Won't Program
				record
• Make	sure program				recording		is set	19~20
		.
properly			see that the current				time is
• Check to								13
					.
correct on the VCR
• Check		if power is off.				is lit on the front			panel.
				" indicator
• Make sure "

no improvement, clean the head using the cleaning

tape.

• If there is any other problem contact service center.

ANCE

MAINTEN-

41 42