Samsung SVR960PRT manual Daily Checks, Turn on the VCR power, Remark, Operating Time Counter

• Clean the Head using cleaning tape.

TIME MODE

Set the TIME MODE to "L6H(L8H)".

4

5 In the case of too much noise on the screen.

• Check to see whether there is any problem during playback.

• Check to see whether the recorded time and date are properly set.

PLAY

Press the PLAY button for playback.

3

Rewind a little of the tape recorded on the previous day.

DAILY CHECKS

BEFORE REQUESTING SERVICE

This video is designed for use on a consistent basis therefore, please check the VCR condition before use, daily.

•When there is any abnormal operation or trouble of the VCR during daily checking, take appropriate actions referring to "trouble shooting" section on pages 40~42.

•If the abnormal operation or trouble remains unresolved, pull out the power cable, and then contact your dealer.

Daily checks

1	Turn on the VCR power
	• Check to see whether there is good quality
	picture on the TV monitor.
	• Check to see whether the time and date
	are correct.
2			F
		W.
	RE		F

1 Careless handling by the user is not covered.

	Strong impacts.
	Video head damage due to improper cleaning.
	Foreign substances entering the unit.
	Unauthorized internal modification by the user.
	Use in high or low temperature, high humidity, or smoky areas.
	Operation other than described in the instructions.
	Use of power sources other than specified for the unit.
2	Operating Time Counter
	Note that it displays a maximum time of 9999.

Refer to Alarm Function for proper operation.

The table of Cleaning Lubrication and replacement time about principal parts

•This table is for normal temperature and humidity. It is necessary to check more frequently under extreme conditions.

•The life of the cylinder assembly depends on the operation conditions.

•If you have any questions. Please contact an authorized technician.

▲ : Cleaning ● : Check & replacement as necessary					◆ : Add Oil		: Change
	500	1000	2000	3000	4000	5000	6000	8000	10000
TAPE GUIDE POSTS	▲	▲	▲	▲	▲	▲	▲	▲	▲
CYLINDER ASSY	▲	●	●	●	●	●	●	●
PINCH ROLLER	▲	▲	▲	▲	▲	●	●	●		MAINTEN- ANCE
CAPSTAN MOTOR	▲	▲	▲	▲	▲	▲	▲	▲
BELT PULLEY			●	●	●	●	●	●
SOLENOID BRAKE UNIT						●	●	●

*Remark

–The clean the parts, use patch and alcohol(solvent).

–After cleaning, use the video tape after alcohol has dired completely.

–We recommend to use oil [EP-56] or solvent.

–One or two drops of oil should be applied after cleaning with alcohol.

–Apply oil periodically (Apply oil after cleaning)

–Applying oil excessively may cause malfunction.

43 44