Timer (Count up)
For the count up timer to be used, the appliance must be switched on but all the cooking zones must be not use timer as a safety shutoff.
1.Touch the Timer control 
sensor.
will appear in the timer display.
2.The count up timer function becomes
active and the display numbers increase over time. To cancel the timer settings, hold down the Timer control
sensor for 2 seconds.
3. To stop the timer, touch the Timer control 
sensor.
Using keep warm
1.Use this function to Keep cooked
food Warm. Touch the corresponding cooking zone’s sensor.
2.Touch the Keep warm 
sensor.
3.The burner display will be changed
Touch again to turn off the burner.
Power boost control
The Power Boost 
function makes additional power available to the each cooking zones. (example : bring a large volume of water to the boil)
Cooking zones | Max Boost time |
|
|
|
|
|
|
220 mm | 10 min |
|
|
|
|
|
|
Front or Rear Flex Plus | 10 min |
|
|
|
|
|
|
Complete Flex Plus | 5 min |
|
|
|
|
|
|
After these times, the cooking zones automatically return to power level | . |
| |
NOTE |
|
| Hob |
In certain circumstances, the Power boost function may be deactivated |
| ||
| use | ||
automatically to protect the internal electronic components of the hob. |
| ||
For example, It is impossible to output max power on Flex zone rear and Flex zone front at the same time.
English 21
2/18/2016 12:44:01 PM