Hob use
Hob use
4.To cancel the timer settings, select the
target burner and hold down the Timer control 
sensor for 2 seconds. This will cancel the burner’s timer settings with a beep. If holding down the Timer control 
sensor for 2 seconds without selecting a burner, this will cancel
the timer settings of the last changed burner.
To display the time remaining for any of the cooking zones, use the Timer control 
sensor after select burner.
The corresponding control indicator will begin to blink slowly.
The settings are reset using the Timer setting sensor (
or ). After the set period of time has elapsed, the cooking zone automatically switches itself off, an acoustic signal sounds as confirmation and the timer display indicates.
NOTE
To change the settings quicker, touch and hold any of the 
or control sensors until the desired value is reached.
20 English
Timer (Count up)
For the count up timer to be used, the appliance must be switched on but all the cooking zones must be not use timer as a safety shutoff.
1.Touch the Timer control 
sensor.
will appear in the timer display.
2.The count up timer function becomes
active and the display numbers increase over time. To cancel the timer settings, hold down the Timer control
sensor for 2 seconds.
3. To stop the timer, touch the Timer control 
sensor.
2/18/2016 1:11:11 PM