Samsung RL36SBSM1/XEG manual Making ICE Using the Water Dispenser Option, Filling the Water Tank

MAKING ICE

USING THE WATER DISPENSER (OPTION)

With the water dispenser, you can obtain chilled water easily without opening the refrigerator door. In addition, you can save electricity by more than 30% reducing the number of times the door is open.

Pull out the ice cube maker.

Fill trays in up to the water level mark (arrow).

Put the ice cube maker back in position.

Close the freezer door.

Once the water has become frozen, turn the knobs on the ice cube trays to empty ice cubes into the storage bin.

A. Twist type

B. Normal type

Overview

Push lever

Water tank cap

Water tank

Water supply device

WHEN THE WATER DISPENSER IS NOT USED, THE FOLLOWING WAYS ARE RECOMMENDED

Fix the water supply device tightly into the fixing hole.

• The door will not be closed automatically when the water supply device is pulled out for a long time because of cold leaking.

Place a separate spare beverage bottle in the location of the exclusive water tank.

Pour water into the ice cube maker.

• Fill the maker up to about 80% with water.

Place the ice cube maker in the upper freezer drawer.

To take out the ice cubes:

• Twist the ice cube maker slightly.

Danger of explosion

Warning • The coldest parts of the refrigerator are the rear panel and the lowest shelf. This is the best place to store delicate foodstuffs.

•Glass bottles containing liquids that can freeze should never be stored in the freezer as the glass will explode when the contents freeze.

Making ice quickly

Note To make a large quantity of ice quickly, press the “SUPER” button to select the fast freeze function.

• Two 1.5 litre bottles can be used.

FILLING THE WATER TANK

Open the round cap and fill the water tank up with drinking water.

• Fill the tank up to the full level (just over 4.2 litres).

Close the round cap by pushing down on it until it clicks into proper place.

Place a cup on the tray dispenser, then press the “PUSH” lever.

10 11