Samsung AQ12FDN, AQ09NSAN, AQ24FCN manual Temperature and Humidity Ranges, Operating Recommendations

Page 25

Temperature and Humidity Ranges

The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use.

MODE

OPERATING CONDITIONS

IF OUT OF CONDITIONS

 

Indoor temp: 16°C~32°C

- A safety device will stop continuously the

 

system functioning;

 

 

COOL

Indoor humidity: below 80%

- Condensation may occur on the indoor unit

 

Outdoor temp: 21°C~43°C

with risk to have either water blow off or drops

 

on the floor;

 

 

HEAT

Indoor temp: below 27°C

- A safety device will stop continuously the

 

Outdoor temp: 0°C~24°C

system functioning;

 

 

 

 

 

 

 

Indoor temp: 16°C~32°C

- A safety device will stop continuously the

 

system functioning;

 

 

DRY

Indoor humidity: below 80%

- Condensation may occur on the indoor unit

 

Outdoor temp: 18°C~43°C

with risk to have either water blow off or drops

 

on the floor;

 

 

POWER SUPPLY

Single phase rated voltage

220V-240V~50Hz

minimum and maximum limit

198V min.-264V max.

 

Any damage occurs out of condition specified cannot be covered by product warranty.

If the system works continuosly outside of conditions, its performace and reliability will be compromised.

Operating Recommendations

When you use your air conditioner, it is recommended that you read the following:

Topic

Recommendation

 

 

Heating capacity

The heat pump inside the air conditioner absorbs heat from outside air and brings itindoors.

 

If the temperature of the outside air drops, the air conditioner heats less. If the room is not warm

 

enough, use an additional heating appliance.

 

 

Warm air circulation

The air conditioner circulates warm air to heat your room. It will take some time to warm

 

the air in your room entirely after the air conditioner turns on.

 

Therefore, turn the air conditioner on in advance.

 

 

Frost

When you select the Heat mode, frost may form in the outdoor unit due to low temperature

 

and high humidity.

 

If this happens:

 

The heating operation is stopped.

 

The air conditioner defrosts automatically for about 7 minutes. After about 7 minutes,

 

the air conditioner starts operating again normally.

 

 

High indoor and

If both the indoor and outdoor temperatures are high when you select the Heat mode,

outdoor temperatures

the fan and the compressor of the outdoor unit may stop periodically.

 

This is normal; wait until the air conditioner turns on again.

 

 

Power failure

If a power failure occurs when the air conditioner is operating, the air conditioner will turn off.

 

When the power returns, the air conditioner will start up again automatically.

 

 

Protection mechanism

When the air conditioner is started immediately after being plugged in or stopped,

 

the normal operation starts up after 3 minutes for the reason of protection.

E-26

08'FORTE_28591A_IB_E(ÐÂ).indd 26

2007-12-7 14:47:26

Image 25
Contents Contents If the power plug is Contact the service centerInflammable gas leakage EarthDuring Operation To let the discharged air out Install the outdoor unit so as Do not open the front grille during operation Air conditioner for a long time to save energy Be sure to insert the air filter  Do not touch the pipes connected to the air conditionerIndoor Unit Name of Each PartOutdoor Unit FAN Remote Control-Buttons and DisplayInserting the Remote Control Batteries Getting Started Result Selecting Auto ModeSelecting Cool Mode Selecting Heat Mode Selecting Dry Mode Selecting Fan Mode Selecting Mode Temperature changes in mode Selecting the Turbo Function Adjusting the Airflow Direction Horizontally Adjusting the Airflow Direction VerticallyTo Cancel the On Timer Setting the On TimerOff Timer longer than the On Timer Setting the Off TimerRoom Temperature Operating Mode Operating Your Air Conditioner Without the Remote ControlCleaning Deodorizing and Bio filter Option Cleaning Your Air ConditionerOperating Recommendations Temperature and Humidity RangesProblem Explanation/Solution Solving Common ProblemsContact Samsung World Wide F I P D G DB98-28591A1 Cooling and Heating
Related manuals
Manual 1 pages 32.24 Kb Manual 28 pages 62.69 Kb Manual 28 pages 62.75 Kb Manual 22 pages 3.96 Kb Manual 22 pages 25.69 Kb Manual 22 pages 27.19 Kb Manual 1 pages 17.05 Kb Manual 22 pages 24.84 Kb Manual 22 pages 50.92 Kb Manual 1 pages 17.04 Kb Manual 24 pages 2.79 Kb Manual 24 pages 63.72 Kb Manual 26 pages 4.8 Kb Manual 26 pages 26.22 Kb Manual 26 pages 38.16 Kb Manual 22 pages 50.18 Kb Manual 24 pages 29.15 Kb Manual 26 pages 38.56 Kb Manual 26 pages 61.9 Kb Manual 26 pages 60.03 Kb Manual 29 pages 30.11 Kb Manual 27 pages 18.02 Kb Manual 27 pages 51.98 Kb Manual 27 pages 37.56 Kb Manual 26 pages 21.03 Kb Manual 20 pages 30.81 Kb Manual 22 pages 56.87 Kb Manual 24 pages 27.86 Kb Manual 26 pages 18.8 Kb Manual 26 pages 21.03 Kb Manual 24 pages 42.76 Kb Manual 18 pages 19.61 Kb Manual 1 pages 26.59 Kb Manual 16 pages 63.69 Kb Manual 16 pages 63.77 Kb Manual 16 pages 61.11 Kb Manual 26 pages 24.99 Kb Manual 26 pages 44.2 Kb

AQ18NENSER, AQ09FANSER, AQ24FAXEUR, AS12FCXXSG, AQ24NSAXEUR specifications

Samsung has long been a leader in the air conditioning industry, continuously innovating to provide energy-efficient and technologically advanced solutions for both residential and commercial spaces. The models AQ09FAN, AQ12FAN, AQ12FBN, AQ12FBX, and AQ18FAN are prime examples of this commitment, each tailored to meet diverse cooling needs while ensuring superior comfort and performance.

The AQ09FAN and AQ12FAN are compact units that stand out for their efficient cooling capacities, making them suitable for smaller rooms and spaces. These models boast Samsung's Digital Inverter technology, which efficiently adjusts the compressor's speed based on the required cooling load, significantly reducing energy consumption. This results in lower electricity bills while maintaining optimal comfort levels. Both models also feature an easy-to-use control panel, allowing users to adjust settings effortlessly.

Moving up the scale, the AQ12FBN and AQ12FBX models provide enhanced cooling power, making them ideal for medium-sized rooms. They encapsulate advanced features such as Anti-Corrosion Coating that helps protect the outdoor unit from rust and weather damage, prolonging the lifespan of the air conditioner. With a sleek design, these units seamlessly integrate into any decor while delivering powerful cooling performance.

The AQ18FAN model, designed for larger spaces, offers impressive cooling capacity and a range of high-tech features. It incorporates Samsung's Smart Wi-Fi capability, enabling users to control the air conditioner remotely via a smartphone app. This not only enhances convenience but also allows for proactive energy management. Furthermore, the AQ18FAN employs a multi-layered filtration system that captures airborne particles, contributing to improved indoor air quality.

Each of these models is equipped with a quiet operation mode, ensuring that comfort does not come at the expense of peace and tranquility within a space. Additionally, the Eco Mode feature further optimizes energy usage, making them environmentally friendly options.

In summary, Samsung's AQ09FAN, AQ12FAN, AQ12FBN, AQ12FBX, and AQ18FAN air conditioners deliver a blend of efficiency, comfort, and advanced technologies. From compact design to powerful cooling capabilities, these models cater to various needs while ensuring exceptional indoor air quality and energy savings. Whether for residential or commercial use, these units exemplify Samsung's dedication to innovative air conditioning solutions.