Selecting Fan Mode
Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode.
1Press the 
(On/Off) button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2Press the 
button on the remote control until 
is displayed.
Result: | The indoor unit beeps each time you press the | button. |
The air conditioner runs in Fan mode.
The temperature is set automatically.
Note You can change modes at any time.
3Press the 
button to select the fan speed until the required setting is displayed.
Low
Medium
High
Result: Each time you press the 
button, the indoor unit beeps.
4To control the airflow direction, refer to page 21.
ENGLISH
FORTE_Inv_IB_E.indd 17