Selecting Good Sleep Mode
Good Sleep mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The Good Sleep mode can be selected only when the air conditioner is switched on in cool/heat mode.
1 Press the 
(On/Off) button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last. The indoor unit beeps.
2Press the 
button to select 
or 
mode.
Result: | | The indoor unit beeps each time you press the | button. |
| | The air conditioner runs in cool or heat mode. |
|
3 Press the 
button.
- The remote control display shows you that this mode automatically stops after
- In the case of adjusting time
Press the 
button to adjust desired operation time from 30 minutes to 12 hours.
Good Sleep mode will automatically stop after the set time.
Press the 
button.
Result: In the case of adjusting the extra time for Good Sleep mode,you should press the 
button within 10 seconds.If you do not press the 
button within 10 seconds.Good Sleep mode will automatically stop in
4Press the 
button to adjust the temperature until the desired
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result: Each time you press the 
button; - The temperature adjusts by 1°C
- The indoor unit beeps
FORTE_Inv_IB_E.indd 18