Removing the Stand
――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1 | 2 | 3 | 4 |
Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
Push the key upward and hold. Turn the stand neck of the display counterclockwise for10°.
After turning the stand neck of the display counterclockwise for10°, lift the stand neck to detach it from the device.
Turn the connecting screw at the bottom of the stand base to separate it.
5
Remove the stand neck from the stand base by pulling it in the direction of the arrow as shown in the figure.
- Caution
Do not press down on the monitor. There is a risk of damaging the monitor.
20