Samsung LC27H800FCUXEN, LC27H800FCIXCI manual Dp Out, DP OUT MST/SST Function Implementation

Page 34

DP OUT

Select the input signal to output to the next monitor and the output mode to simplify the connection and control of displaying devices.

DP OUT (MST/SST) Function Implementation

Connecting a PC via DisplayPort

――If the MST mode is selected for DP OUT, FreeSync is not supported for all connected monitors.

――Before selecting the MST mode for DP OUT, make sure that the device supports DisplayPort:MST (Daisy Chain)/HBR2 (High Bit Rate). Incorrect settings may lead to black screen or inconsistency between the actual output mode and the selected output mode. If a black screen occurs, change the DP OUT output mode.

•• MST/SST: A technology used for connection and driving of multi-stream display signals.

MST

PC

DP Cable

DP IN

Monitor1

Screen A

 

 

DP Cable

 

DP OUT

DP IN

 

Monitor 2

Screen B

‒‒ MST: Stands for Multi-Stream Transport. Can transport multiple video and audio streams, but needs the support of both the drive capacity of the graphics card and the resolution of the monitor.

OSD → DisplayPort:MST

‒‒ SST: Stands for Single Stream Transport. Can transport only a combination of a single video stream and a single audio stream.

•• DP OUT mode: 5 modes

USB Type-C:MST

USB Type-C:SST

DisplayPort:MST

SST

PC

DP Cable

DP IN

Monitor1

Screen A

 

 

 

DP Cable

 

 

 

DP OUT

 

 

 

 

 

 

DP IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Monitor 2

Screen A

DisplayPort:SST

HDMI:SST

OSD → DisplayPort:SST

――It is recommended to connect monitors of the same series for better compatibility and stability.

•• Make sure that the graphics card supports the MST (Daisy Chain) function. To check this, visit the website of the graphics card manufacturer.

•• The output mode of DP OUT varies with the settings of DisplayPort Ver. When DisplayPort Ver. is set to 1.1, DP OUT only supports SST.

•• When connecting a PC using DP cable, you must set DP OUT mode to "DisplayPort: MST (SST)" on the OSD menu. (OSD – System – DP OUT - DisplayPort:MST/DisplayPort:SST)

•• Because of the bandwidth limit of DisplayPort Ver. 1.2, up to four1920 x 1080 @ 60 Hz monitors can be connected and used. But this specification may vary depending on the cable used and the performance of the graphics card.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents C27H800FC Table of contents Installing the Software Safety Precautions Before Using the ProductSecuring the Installation Space Precautions for storageCleaning Electricity and SafetyInstallation Operation Page Parts PreparationsControl Panel Direct Key guide Function Key Guide ReturnJOG Button Power saving/Non-signal mode Changing the Volume setting Changing Brightness, Contrast and Sharpness settingsReverse Side Port DescriptionAdjusting the Product Tilt and Height Rotating the Monitor ScreenAnti-theft Lock To lock an anti-theft locking devicePrecautions for moving the monitor Installing a Wall-mount Kit or Desktop Stand Installation Attaching the StandRemoving the Stand Connecting and Using a PC Connecting and Using a Source DeviceRead below before installing the monitor Connection Using the Hdmi CableConnection Using the HDMI-DVI Cable Connection Using the USB Type-C CableConnection Using an DP Cable Connection Using the DP CableConnecting to Headphones Connecting a PC to the Product Utilizing the Product as a USB HUBConnecting the Power PowerTidying Up the Connected Cables Setting Optimum Resolution Driver InstallationCorrect posture to use the product Picture Samsung Magic BrightSharpness BrightnessContrast ColorSamsung Magic Upscale Eye Saver ModeGame Mode Hdmi Black LevelScreen Adjustment Picture SizePosition OnScreen DisplayTransparency LanguageSystem DisplayPort VerDP OUT DP OUT MST/SST Function ImplementationConnecting a PC via USB Type-C port Connecting a PC via Hdmi port FreeSync Models in the Graphic Cards list supports FreeSyncPage PC/AV Mode Off Timer PlusSmart ECO Saving Source Detection Power LED OnReset All Key Repeat TimeRestrictions and Problems with the Installation Installing the SoftwareEasy Setting Box System RequirementsChecking the Resolution and Frequency Troubleshooting GuideTesting the Product Check the followingSound issue How can I change the frequency? Specifications GeneralStandard Signal Mode Table Resolution Appendix Responsibility for the Pay Service Cost to CustomersProduct damage caused by customers fault Not a product defectExtended warranty
Related manuals
Manual 48 pages 10.63 Kb Manual 49 pages 62.56 Kb Manual 49 pages 41.13 Kb Manual 49 pages 3.21 Kb Manual 49 pages 29.92 Kb Manual 49 pages 27.4 Kb Manual 49 pages 2.69 Kb Manual 49 pages 29.15 Kb Manual 49 pages 41.26 Kb Manual 49 pages 63.06 Kb Manual 49 pages 61.61 Kb Manual 49 pages 36.75 Kb Manual 48 pages 17.56 Kb Manual 49 pages 57.01 Kb

LC27H800FCIXCI, LC27H800FCUXEN specifications

The Samsung LC27H800FCIXCI and LC27H800FCUXEN are remarkable examples of modern display technology, designed for those who seek exceptional visual quality and versatility in their monitors. Both models feature a 27-inch Quantum Dot display, which ensures vibrant colors and sharp details, making them ideal for tasks ranging from professional graphic design to immersive gaming.

One of the standout features of these monitors is the QLED technology. With Quantum Dot technology, the screen achieves a wider color spectrum and enhanced brightness levels, providing a more lifelike viewing experience. This technology also contributes to HDR (High Dynamic Range) support, allowing users to enjoy deeper blacks and brighter whites, which is essential for high-contrast content.

The LC27H800FCI models boast a stunning 2560 x 1440 resolution, commonly referred to as QHD. This higher resolution compared to standard Full HD provides an increased pixel density, resulting in sharper images and greater detail. Whether you’re editing photos, watching videos, or playing games, the QHD resolution enhances overall visual clarity.

Another significant aspect of these monitors is the ergonomics and design. Both monitors feature a slim bezel, adding to the sleek aesthetic and allowing for a more immersive experience when used in multi-monitor setups. Additionally, their adjustable stands offer tilt and height adjustments, ensuring that users can find the most comfortable viewing angle.

Samsung has also integrated Eye Saver Mode and Flicker Free technology into these models, which helps reduce eye strain during extended use. This is particularly beneficial for professionals who may spend long hours in front of their screens.

The LC27H800FCI and LC27H800FCUXEN also come equipped with a variety of connectivity options, including HDMI and DisplayPort, making them compatible with a wide range of devices. Moreover, their compatibility with USB-C provides added convenience for users with modern laptops.

In conclusion, the Samsung LC27H800FCIXCI and LC27H800FCUXEN monitors are exemplary choices for anyone looking for a blend of cutting-edge technology, impressive visual performance, and ergonomic design. Whether for professional or personal use, these monitors will cater to the needs of users demanding quality and comfort in their display devices.
Top Page Image Contents