![](/images/new-backgrounds/1154939/15493973x1.webp)
Basic Features
Network Menu
Network Settings
OO MENUm→ Network→ Network Settings →
ENTERE
Network
Network Settings
Network Status
AllShare Settings
•The displayed image may differ depending on the model.
Set the network connection to use various Internet services such as Smart Hub, AllShare and perform software upgrades.
Network Status
OO MENUm→ Network→ Network Status →
ENTERE
You can check the current network and Internet status.
AllShare Settings
OO MENUm→ Network→ AllShare Settings →
ENTERE
Selects whether to use the call arrivals text message contents, and schedules set on the network.
¦¦ Wired
□□ Network Settings (Auto)
Use the automatic Network Settings when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:
How to set up automatically
Network Settings
Select a network connection type.
Wired
Wireless (general)
| Connect to the network using | Previous |
WPS(PBC) |
| |
a LAN cable. Please make sure |
| |
| that the LAN cable is connected. | Next |
One Foot Connection |
| Cancel |
|
|
xx The displayed image may differ depending on the model.
1.Go to Network Settings screen.
To enter it, follow the directions of Network Settings.
2.Select the Wireless (general).
3.The network test screen appears, and network setting is done.
Network Settings
Wireless network and Internet connection settings completed.
MAC Address | 00:12:fb:2b:56:4d |
|
IP Address | 192.168.11.4 |
|
Subnet Mask | 255.255.255.0 | Previous |
Gareway | 192.168.11.1 | IP Setting |
|
| |
DNS Server | 192.168.11.1 |
|
|
| Retry |
Internet is connected successfully. |
| OK |
If you have a problem with using Internet Service, contact your Internet |
service provider.
✎✎If it fails to set automatically, check the connection of LAN port.
✎✎If you cannot find network connection values or if you want to set connection manually, set it to Manual. Refer to following “How to set up manually”.
□□ Network Settings (Manual)
Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these steps:
1.Right click the Network icon on the bottom right of the screen.
2.In the
3.On the dialog that appears, click the Support tab.
4.On the Support Tab, click the Details button. The Network connection values are displayed.