2-8 Connecting COMMON INTERFACE
1.Insert the CI CARD into the CAM in the direction of the arrow until it fits.
2.Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
3.Check if you can see a picture on a scrambled signal channel.
• When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
•The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
•When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating that the channel list is now updated.
•You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.
•Insert the
•CAM is not supported in some countries and regions, check with your authorized dealer.
Installing the Product |