Samsung LS22FMDGF/XE, LS22FMDGF/EN manual Before Requesting Service, Problems Related to Screen

Page 57

5-2 Before Requesting Service

Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center.

PROBLEMS RELATED TO INSTALLATION (PC MODE)

The monitor screen flickers.

Check if the signal cable between the computer and the monitor is securely connected and tightened.

(Refer to Connecting to a Computer)

PROBLEMS RELATED TO SCREEN

 

 

 

Screen is blank and power indicator is off.

 

Ensure that the power cord is firmly connected and the LCD monitor is on.

 

 

(Refer to Connecting to a Computer)

 

 

 

"Check Signal Cable” message

 

Ensure that the signal cable is firmly connected to the PC or video sources.

 

 

(Refer to Connecting to a Computer)

 

 

 

"Not Optimum Mode" message

 

Check the maximum resolution and the frequency of the video adapter.

 

 

Compare these values with the data in the Standard Signal Mode Table.

 

 

 

Picture rolls vertically.

 

Check if the signal cable is securely connected.Connect it again securely.

 

 

(Refer to Connecting to a Computer)

 

 

 

Image is not clear. Picture is blurred.

 

Run Frequency <Coarse > and < Fine> tuning.

 

 

Turn on again after removing all accessories(video extension cable, etc.)

 

 

Set resolution and frequency to the recommended ranges.

 

 

 

Picture image is unstable and vibrates.

 

Check if the resolution and frequency set for the computer video card falls

 

 

in the range supported by the monitor. If not, reset them referring to the

Ghost images are shown in the picture.

 

 

current <Information> under the monitor menu and Standard Signal Mode

 

 

 

 

Table.

 

 

 

The image is too light or too dark

 

Adjust the Brightness and Contrast

 

 

(Refer to the <Brightness>, <Contrast>)

 

 

The display brightness can differ according to the mode set for <MagicAn-

 

 

gle>.

 

 

If <MagicBright> is set to <Dynamic Contrast>, the display brightness can

 

 

differ according to the input signal.

 

 

 

Screen is blank and the power indicator light

 

The monitor is using its power management system

blinks every 0.5 or 1 seconds

 

Press a key on the keyboard

 

 

 

 

 

The screen is blank and is blinking.

 

If you see the TEST GOOD message on the screen when you press the [

 

 

MENU] button, check the cable connection between the monitor and the

 

 

computer to ensure that the connector is properly connected.

 

 

 

 

PROBLEMS RELATED TO AUDIO

 

 

 

No sound

 

Ensure that the audio cable is firmly connected to both the audio-in port on

 

 

your monitor and the audio-out port on your sound card.

 

 

(Refer to Connecting to a Computer)

 

 

Check the volume level.

 

 

 

The sound level is too low.

 

Check the volume level.

 

 

If the volume is still too low after turning the control to its maximum, check

 

 

the volume control on the computer sound card or software program.

 

 

 

Troubleshooting

5-2

Page 56 Page 58
Image 57
Page 56 Page 58
Contents LCD TV Monitor Table Of Contents Before You Start Using this ManualIcons used in this manual Copyright NoticeCare and Maintenance Appearance and the color may differ depending on the modelAppearance may differ depending on the product Icons used for safety precautions Safety PrecautionsPower Related Meaning of SignsInstallation Related Cleaning Related Usage Related Page Maintaining the Correct Posture when Using this Product Package Contents Installing the ProductConnecting to a Computer Installing the Product Using it as a TV Connecting an Hdmi cable Connecting Using a DVI to Hdmi Cable Connecting a Component cable Connecting a Scart cable Connecting Common Interface Kensington Lock Connecting HeadphonesPlug & Play Feature Using the ProductPlug & Play feature is only available in the TV mode If you want to reset this featureIcon Description Viewing the Control panelPower Remote ControlInstalling Batteries in the Remote Control Teletext Feature TOP Menus SUB Menus Using the Screen Adjustment Menu OSD On Screen DisplayPicture PC / DVI Menu Description Set to OFF when viewing directly in front of the screenNot available when MagicBright is Dynamic Contrast Available in PC Mode OnlyAvailable in PC / DVI mode only Picture TV / Ext. / Component / Hdmi Lean Back Mode2 menus It is activated when the signal is NtscAdvanced Settings is available in Standard or Movie mode Advanced SettingsMenu Description Sound Selecting Tools → SRS TS HD Selecting the Sound Mode Air / Cable ChannelMenu Description Included on the detailed information Default Guide, refer to the descriptionsWill be appeared if the summary is long Or buttonUsing the Color buttons with the Channel List Remote controlSelected channel Green Zoom Enlarges or shrinks a channel numberTo cancel the Sleep Timer function, select Off SetupAuto Power Off You can set the Antenna by selecting Channel → AntennaFor too long time When the parental ratings are set, the symbol is displayed PIN numberChange PIN from the menu Higher the number, the brighter the light of the LED emits Input Application Anynet+ HDMI-CEC What is Anynet+?Setup Support If software was changed, existing software is displayed With the strongest signalInstalling the Device Driver Standard Signal Mode Table Horizontal Frequency Resolution Scan Verticalfrequency Input SourceNatural Color What is Natural Color ?Installing the Software What is MultiScreen ?MultiScreen Removing the SoftwareMonitor Self-Diagnosis TroubleshootingBefore Requesting Service Problems Related to ScreenProblems Related to Audio Problems Related to Remote Control FAQ Please TRY the Following FAQModel Name LD220HD SpecificationsPower Saving Function North America Contact Samsung WorldwideLatin America EuropeAsia Pacific CISMiddle East & Africa Correct Disposal of Batteries in this Product Europe only Correct DisposalMore Information
Related manuals
Manual 66 pages 12.25 Kb Manual 65 pages 9.62 Kb Manual 66 pages 16.49 Kb Manual 73 pages 44.07 Kb Manual 66 pages 23.86 Kb Manual 66 pages 30.02 Kb Manual 73 pages 55.99 Kb Manual 73 pages 49.63 Kb Manual 73 pages 51.25 Kb Manual 74 pages 3.99 Kb Manual 74 pages 18.22 Kb Manual 69 pages 2.39 Kb Manual 68 pages 19.25 Kb Manual 70 pages 6.65 Kb Manual 66 pages 31.63 Kb Manual 73 pages 8.57 Kb

LS22FMDGF/XE, LS22FMDGF/EN specifications

The Samsung LS22FMDGF/EN is a prominent 21.5-inch LED monitor designed to cater to both everyday users and professional settings. With a sleek design and a range of features, it stands out for its performance and versatility. The monitor boasts a Full HD resolution of 1920 x 1080 pixels, ensuring sharp images and vivid colors that enhance viewing experiences, whether for gaming, multimedia consumption, or professional tasks.

One of the key technologies featured in the LS22FMDGF/EN is the Advanced High-Performance In-Plane Switching (AH-IPS) panel. This technology delivers wider viewing angles, ensuring consistent color reproduction and brightness levels, regardless of the viewer's position. With an impressive 178-degree viewing angle, the monitor eliminates color distortion, making it ideal for collaborative environments or for sharing content with friends and family.

The LS22FMDGF/EN also incorporates Samsung's Eye Saver Mode and Flicker-Free technology. Eye Saver Mode reduces blue light emissions, which can help reduce eye strain during prolonged use. Flicker-Free technology minimizes screen flickering, providing a more comfortable viewing experience, especially during extended work or gaming sessions. Together, these features make the monitor a great choice for those who spend long hours in front of the screen.

In terms of design, the monitor features an ultra-slim profile with a stylish stand that offers tilt adjustments, enabling users to achieve the most comfortable viewing angle. The ultra-slim bezels enhance its modern aesthetic and maximize the screen space, creating an immersive viewing experience. The monitor is also VESA mount compatible, allowing users the flexibility to mount it on a wall or an adjustable arm.

Connectivity options are ample with HDMI and VGA ports available, making it easy to connect the monitor to a variety of devices, such as laptops, desktops, and gaming consoles. The monitor’s energy efficiency is noteworthy, with various energy-saving features that contribute to reduced power consumption.

Overall, the Samsung LS22FMDGF/EN is a well-rounded monitor that combines stylish design, advanced technology, and user-friendly features, making it an excellent choice for anyone looking for reliable performance in both work and entertainment scenarios.
Top Page Image Contents