Samsung LS22FMDGF/EN, LS22FMDGF/XE manual With the strongest signal

MENU		DESCRIPTION
Self Diagnosis	•	<Picture Test>
		If you think you have a picture problem, perform the picture test. Check the colour pattern on the
		screen to see if the problem still exists.
		• <Yes> : If the test pattern does not appear or there is noise in the test pattern, select <Yes>.
		There may be a problem with the TV. Contact Samsung‘s call centre for assistance.
		• <No> : If the test pattern is properly displayed, select <No>. There may be a problem with your
		external equipment. Please check your connections. If the problem still persists, refer to the
		external device‘s user manual.
	•	<Sound Test>
		If you think you have a sound problem, please perform the sound test. You can check the sound by
		playing a built-in melody sound through the TV.
		• <Yes> : If during the sound test you can hear sound only from one speaker or not at all, select
		<Yes>. There may be a problem with the TV. Contact Samsung’s call center for assistance.
		• <No> : If you can hear sound from the speakers, select <No>. There may be a problem with
		your external equipment. Please check your connections. If the problem still persists, refer to
		the external device’s user manual.
	• <Signal Information (digital channels only)>
		Unlike analogue channels, which can vary in reception quality from snowy to clear, digital (HDTV)
		channels have either perfect reception quality or you will not receive them at all. So, unlike
		analogue channels, you cannot fine tune a digital channel. You can, however, adjust your antenna
		to improve the reception of available digital channels.
		If the signal strength meter indicates that the signal is weak, physically adjust your antenna to
		increase the signal strength. Continue to adjust the antenna until you find the best position
		with the strongest signal.
Software Upgrade	•	<By USB>
		Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV.
		Please be careful not to disconnect the power or remove the USB drive while upgrades are being
		applied. The TV will turn off and turn on automatically after completing the firmware upgrade.
		Please check the firmware version after the upgrades are complete (the new version will have a
		higher number than the older version).
		When software is upgraded, video and audio settings you have made will return to their default
		(factory) settings. We recommend you write down your settings so that you can easily reset them
		after the upgrade.
	•	<By Channel>
		Upgrades the software using the broadcasting signal.
	•	<Standby Mode Upgrade>
		To continue software upgrade with master power on, select on by pressing the ▲ or ▼ button. 45
		minutes after entering standby mode, a manual upgrade is automatically conducted. Since the
		power of the unit is turned on internally, the screen may be on slightly for the LED product. This
		phenomenon may continue for more than 1 hour until the software upgrade is completed.
	•	<Alternative Software>(Backup)
		If there is an issue with the new firmware and it is affecting operation, you can change the software
		to the previous version.
		• If software was changed, existing software is displayed.
		• You can change current software to alternative software by ‘Alternative Software’.
HD Connection Guide	This menu presents the connection method that provides the optimal quality for the HDTV. Refer to
	this information when connecting external devices to the TV.
Contact Samsung	View this information when your TV does not work properly or when you want to upgrade the soft-
	ware. You can view the information regarding the call center, product and software file download
	method.

3-5 Using the Product