Samsung LS22CRASB6/EDC, LS22CRASB/EDC manual Front, Auto, Menu

Front

1. AUTO

2. PIP

3.

4. - +

5. MENU

6.

7. Remote Control Sensor

8. [ ] Power button

9. Power indicator

10. Speaker

1.AUTO

(Available in PC mode only)

When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center.

Press to self-adjust to the incoming Analog signal. The values of fine,coarse and position are adjusted automatically.

2.PIP - Available in PC/DVI Mode

In PC mode, turns on Video or TV screens in PIP mode.

3.

Moves from one menu item to another vertically or adjusts selected menu values. In TV mode, selects TV channels.

4.- +

Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume.

5.MENU

Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu.

6.

Activates a highlighted menu item.

Press the button to change the input signal source.

Changing the source is allowed only in external devices that are connected to the monitor at the time.

To switch Screen modes:

[PC] → [DVI] → [TV] → [Ext.] → [AV] → [S-Video] → [Component] → [HDMI] >>Click here to see an animation clip

7.Remote Control Sensor

Aim the remote control towards this spot on the monitor.

8.[ ] Power button Turns the monitor On/Off.

9.Power indicator

This will enable you to see the overall power status of the system. For more information, see the PowerSaver section.

10.Speaker

You can hear sound by connecting the soundcard of your PC to the monitor.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.