Samsung LS22CRASB6/EDC, LS22CRASB/EDC manual Question, Answer

Power Indicator blinks green.

Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds

The screen is blank and is blinking.

zThe monitor is currently saving the changes made in settings to the OSD memory.

zThe monitor is using its power management system.

zpress a key on the keyboard

zIf you see the "TEST GOOD" message on the screen when you press the MENU button, check the cable connection between the monitor and the computer to ensure that the connector is properly connected.

Problems

No sound

The sound level is too low.

Sound is too high pitched or too low pitched

Solutions

zEnsure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card.

(Refer to the Connecting the Monitor)

zCheck the volume level. (Refer to the Volume)

zCheck the volume level. (Refer to the Volume)

zIf the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.

zAdjust the Treble and Bass to appropriate level.

The remote control buttons do not respond.

zCheck the battery polarities (+/-).

zCheck if the batteries have been exhausted.

zCheck if the power is on.

zCheck if the power cord is securely connected.

zCheck if a special fluorescent or neon lamp is on in the vicinity.

Q & A

Question

How can I change the frequency?

How can I adjust the resolution?

How can I set the Power Saving

Answer

The frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

zWindows XP :

Set the resolution in the Control Panel→Appearance and Themes→Display→Settings.

zWindows ME/2000 :

Set the resolution in the Control Panel→Display→Settings.

*Contact the video card manufacturer for details.

zWindows XP :