Samsung LS22CRASB6/EDC, LS22CRASB/EDC manual Folding the base, Attaching a base

1.Folding the base

The monitor may be reclined from -1 to 23 degrees.

2.Attaching a base

This monitor accepts a 100 mm X 100 mm VESA-compliant mounting interface pad.

A.Monitor

B.Mounting interface pad (Sold separately)

1.Turn off your monitor and unplug its power cord.

2.Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.

3.Turn the fixing screw handle on the stand counterclockwise to loosen it and then separate it from the stand.

4.Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.

To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10cm away from the wall surface.

Contact the nearest Samsung Service Center for more information.

Samsung Electronics will not be responsible for damages caused by using a base other than those specified.

Please use Wall Mount according to the International standards.