Samsung LS24MYKABCA/EN Cannot see the On Screen Display, Screen suddenly has become unbalanced

Page 56

Troubleshooting

A:If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1920 x 1200 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum Mode", "Recommended Mode 1920 x 1200 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

Q:There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals?

A:The monitor is in PowerSaver mode.

A:Press a key on the keyboard to activate the monitor and restore the image on the screen.

A:If there is still no image, press the '/SOURCE' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Q:Connected using the DVI cable?

A:You may get a blank screen if you boot the system before you connect the DVI cable, or dis- connect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals. Connect the DVI cable and then reboot the system.

I cannot see the On Screen Display.

Q:Have you locked the On Screen Display (OSD) Menu to prevent changes?

A:Unlock the OSD by pressing the [MENU/ ] button for at least 5 seconds.

The screen shows strange colors or just black and white.

Q:Is the screen displaying only one color as if looking at the screen through a cellophane paper?

A:Check the signal cable connection.

A:Make sure the video card is fully inserted in its slot.

Q:Have the screen colors become strange after running a program or due to a crash between ap- plications?

A:Reboot the computer.

Q:Has the video card been set properly?

A:Set the video card by referring to the video card manual.

The screen suddenly has become unbalanced.

Q:Have you changed the video card or the driver?

A:Adjust screen image position and size using the OSD.

Q:Have you adjusted the resolution or frequency to the monitor?

A:Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes).

55

Image 56
Contents LCD Monitor SyncMaster 2443BW/2443BWXSafety Instructions PowerNotational Notational ConventionsInstallation Clean Others Page Page Page Unpacking Package ContentsIntroduction Manuals CablesOthers Sold separatelyYour Monitor Initial Settings FrontRear Brightness buttonPower port Page Connections Connecting CablesConnecting USB Option Page Using the Stand Monitor Assembly Has StandAttaching a Base Using the Software Installing the Monitor Driver AutomaticMonitor Driver Internet web siteInstalling the Monitor Driver Manual Page Page Page Page Page Page How to install the Natural Color software How to delete the Natural Color software programNatural Color Natural Color Software Program MagicTuneInstallation Problems System RequirementsUninstall MagicRotation InstallationWindows 98 SE Service Packs Using the Software OSD Lock & Unlock Adjusting the MonitorDirect Functions Page Customized key Image Size MagicBright MagicColor Color EffectBrightness SourceContrast OSD FunctionPicture Brightness MagicBright Color MagicColor Color Tone Color Control Color EffectOff Grayscale Green Aqua Sepia Mode 1 Mode 2 ModeGamma Image Coarse Fine SharpnessPosition OSD LanguageAdjusting the Monitor Off On TransparencyDisplay Time Yes Setup ResetSec 10 sec 20 sec 200 sec Auto Manual Auto SourceImage Size Page Information Auto WideTroubleshooting Self-Test Feature CheckEnvironment Useful TipsCheck List No images on the screen. I cannot turn on the monitorScreen suddenly has become unbalanced Cannot see the On Screen DisplayScreen shows strange colors or just black and white LED is blinking but no images on the screen Screen is out of focus or OSD cannot be adjustedCheck when MagicTune does not function properly MagicTune doesnt work properly Page Specifications GeneralPowerSaver Vesa Mounting InterfaceEnvironmental considerations Plug and Play CapabilityPreset Timing Modes Model Name SyncMaster 2443BWX 100mm X 100mm Preset Timing Modes Page Product Information Image Retention Free InformationFor Better Display Display Information together with Logo or Moving image cycle Page Our LCD Monitor satisfies ISO13406-2 Pixel fault Class Appendix Contact Samsung WorldwideNorth America Latin AmericaCIS Asia PacificTerms Middle East & AfricaCorrect Disposal Authority
Related manuals
Manual 196 pages 17.83 Kb Manual 197 pages 26.5 Kb Manual 196 pages 4.38 Kb Manual 196 pages 16.82 Kb Manual 18 pages 16.1 Kb Manual 17 pages 5.38 Kb Manual 16 pages 46.76 Kb Manual 77 pages 58.52 Kb Manual 78 pages 23.95 Kb Manual 16 pages 14.51 Kb Manual 78 pages 3.44 Kb Manual 79 pages 31.72 Kb Manual 78 pages 52.75 Kb Manual 73 pages 35.27 Kb Manual 74 pages 37.51 Kb Manual 565 pages 5.09 Kb Manual 74 pages 20.94 Kb Manual 578 pages 60.85 Kb Manual 74 pages 29.73 Kb Manual 76 pages 51.98 Kb Manual 17 pages 16.13 Kb Manual 75 pages 3.79 Kb Manual 75 pages 24.36 Kb Manual 74 pages 42.48 Kb Manual 75 pages 27.17 Kb Manual 77 pages 60.98 Kb Manual 74 pages 23.13 Kb Manual 18 pages 50.84 Kb Manual 19 pages 55.03 Kb Manual 17 pages 5.09 Kb Manual 17 pages 3.76 Kb