Checking a Programmed Sequence

14-543.fm Page 13 Wednesday, June 30, 1999 3:52 PM

3. Select the track you want by

pressing SKIP/SEARCH or

. The track number you selected appears on the display.

4.Press PROGRAM. The selected track is stored, and the next pro- gram number appears on the dis- play.

5.Repeat Steps 3 and 4 to store up to 16 tracks.

Notes:

•You can store the same track more than once.

•When 16 tracks are pro- grammed, C -01and the first track’s number appear on the display.

6.To complete programming and play the programmed sequence,

press PLAY/PAUSE . The CD player begins playing the first track of the programmed sequence. The display shows the play indicator, the current track number, and the current track’s elapsed playing time.

Notes:

•Programming is not completed

until you press PLAY/PAUSE .

•To repeat, skip over, or search for tracks, see “Special CD Player Features.”

To check the programmed sequence, while the CD is stopped, repeatedly press PROGRAM. The display shows each stored track number.

Erasing a Programmed Sequence

Any of the following will erase a pro- grammed sequence:

•Press STOP/CLEAR until PROGRAM clears from the display and the CD’s total number of tracks and playing time appear.

•Press STOP/CLEAR . Then press PUSH OPEN after the CD stops turning.

•Set FUNCTION to another position.

•Disconnect the power source.