Radio Shack CD-3319 Connecting AN Auxiliary Audio Source, Connecting the Speaker Wires

14-543.fm Page 6 Wednesday, June 30, 1999 3:52 PM

Connecting the Speaker Wires

Follow these steps to connect the speaker wires to the CD-3319.

1.Unwind as much speaker wire as you need from the back of each speaker, then slide the wire through one of the slots on the back of each speaker to hold it in place.

2.Insert the left speaker’s plug into SPEAKER L on the back of the CD-3319, then insert the right plug into SPEAKER R.

Note: Be sure to match the posi- tive side of the plug to the positive side of the terminal, and the nega- tive side to the negative.

CONNECTING AN

AUXILIARY AUDIO

SOURCE

To connect an auxiliary audio source to your CD-3319, such as a TV or VCR, plug the audio source’s left and right line level audio wires into AUX L (left) and AUX R (right).

Set FUNCTION to AUX to select and listen to an auxiliary audio source.

6