Radio Shack CD-3319 owner manual Preparation, Connecting Speakers, Attaching the Speakers

14-543.fm Page 5 Wednesday, June 30, 1999 3:52 PM

PREPARATION

Important:

•Complete all connections to the CD-3319 before you connect it to power.

•Be sure to follow all of the installa- tion instructions described in the enclosed “Important Safety In- structions.”

Place the speakers so the distance between them is the same as the dis- tance between the listening area and a point halfway between the speakers. If the distance between the speakers is greater, you can improve the stereo effect by angling the speakers in to- ward the listening area.

CONNECTING THE

SPEAKERS

Attaching the Speakers

To attach the supplied speakers to the CD-3319, slide each speaker down into the grooves on each side of the CD-3319 until it clicks.

To detach each speaker, press and hold the speaker’s locking latch away from the CD-3319, then lift the speak- er straight up.

To increase the bass effect, place the speakers in corners, against the wall, or directly on the floor. To decrease the bass effect, move the speakers slightly away from the wall, or raise them 6 or more inches off the floor. You can purchase speaker stands at your local Radio Shack store.

Note: If you want to connect speakers other than the supplied ones, use speakers with an impedance of 4 ohms.

5