TL-MR32203G/4G Wireless N Router User Guide

¾Connect on Demand - In this mode, the Internet connection can be terminated automatically after a specified inactivity period (Max Idle Time) and be re-established when you attempt to access the Internet again. If you want your Internet connection keeps active all the time, please enter “0” in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects.

¾Connect Automatically - The connection can be re-established automatically when it was down.

¾Time-based Connecting - The connection will only be established in the period from the

start time to the end time (both are in HH:MM format).

) Note:

Only when you have configured the system time on System Tools -> Time page, will the Time-based Connecting function can take effect.

¾Connect Manually - You can click the Connect/ Disconnect button to connect/disconnect immediately. This mode also supports the Max Idle Time function as Connect on Demand mode. The Internet connection can be disconnected automatically after a specified inactivity period and re-established when you attempt to access the Internet again.

Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle Time, since some applications are visiting the Internet continually in the background.

If you want to do some advanced configurations, please click the Advanced button, and the page shown in Figure 4-13will then appear:

Figure 4-13 PPPoE Advanced Settings

¾MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP.

-30-

Page 39
Image 39
TP-Link manual TL-MR32203G/4G Wireless N Router User Guide