TL-MR3220 3G/4G Wireless N Router User Guide
-24-
Router. If your USB modem inserted is supported by the Router, then “Identify successfully
will display in the 3G/4G USB Modem field as shown in Figure 4-6.
) Note:
3G/4G settings are unavailable when the Internet Access mode is set to WAN Only mode. Please
change settings on Internet Access if you want to use 3G/4G.
Figure 4-6 3G/4G
¾ Location - Please select the location where you're enjoying the 3G/4G card.
¾ Mobile ISP - Please select the ISP (Internet Service Provider) you apply to for 3G/4G
service. The Router will show the default Dial Number and APN of that ISP.
¾ Connect on Demand - You can configure the Router to disconnect your Internet
connection after a specified period of the Internet connectivity (Max Idle Time). If your
Internet connection has been terminated due to inactivity, Connect on Demand enables
the Router to automatically re-establish your connection as soon as you attempt to access
the Internet again. If you wish to activate Connect on Demand, click the radio button. If you
want your Internet connection to remain active at all times, enter 0 in the Max Idle Time
field. Otherwise, enter the number of minutes you want to have elapsed before your Internet
connection terminates.
) Note:
Sometimes the connection cannot be disconnected although you specify a time to Max Idle
Time because some applications visit the Internet continually in the background.
¾ Connect Automatically - Connect automatically after the Router is disconnected. To use
this option, click the radio button.