Tidying Up the Connected Cables
1 | 2 | 3 | 4 |
Stand assembly is complete. | Adjust the screen, as shown in the figure. | Connect cables to the appropriate connectors. |
5 | 6 |
Use the same method to clean up the other cables. Adjust the screen up and down to a proper position.
Caution
While rotating the cable fixed on the holder, the cable may be separated or damaged. In this case, first remove the cable from the holder.
Run the cables through the holder in the direction of the arrow from the lower part of the holder, as shown in the image.
Pull cable down to adjust the length.
27