Eco Saving Plus
The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel.
――This menu is not available when Eye Saver Mode is enabled. ――This menu is not available when Local Dimming is enabled.
•• Off: Deactivate the Eco Saving Plus function.
•• Auto: The power consumption will automatically be reduced by about 10% over the current setting. (The reduction of power consumption depends on the customer screen brightness condition.)
•• Low: The power consumption will be reduced by 25% over the default setting.
•• High: The power consumption will be reduced by 50% over the default setting.
Off Timer
Off Timer: Turn on Off Timer mode.
Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours.
――This option is only available when Off Timer is set to On.
――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations. If you do not want the timer to activate, go to 
→ System and set Off Timer to Off.
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
•• Set to PC when connected to a PC.
•• Set to AV when connected to an AV device.
――Supplied for the wide models only such as 16:9 or16:10.
――If the monitor is in HDMI1, HDMI2, DisplayPort mode and the screen says Check Signal Cable or power saving
mode activates, press the JOG button to display the 
icon. You can select PC or AV.
USB Super Charging
Charge the battery of a connected source device quickly using the USB 3.0 port on the product.
USB Super Charging: Turn on USB Super Charging mode.
――Super charging is available via the | 2 port. Use this port to charge devices faster than using a normal |
USB port. The charging speed may vary, depending on the connected device.
――Quick battery charging may not be supported and/or charging may take more time on some mobile devices.
――When super charging is turned off for the | 2 port, use this port for regular speed charging and data |
transfer. |
|
――If a USB 2.0 or lower device is connected to the | 2 port and super charging is turned on, data transfer is |
impossible, but it is possible if a USB 3.0 device is connected.
※These ports may not be compatible with new USB devices that may be released in the future.
――If a device, such as a mouse, keyboard or memory storage device, is connected to the | 2 port and the |
device is USB 2.0 or lower, turn off super charging. |
|
――If super charging is turned on using the OSD settings menu, all devices connected to USB ports 1 through 2 on the monitor are
※ Before turning on super charging, close all files on storage devices connected to USB ports.
39