3Screen Setup
3.8Eye Saver Mode
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as it met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
3.8.1 Configuring Eye Saver Mode
1When the Function Key Guide appears, select [ ] by moving the JOG button UP. Next, press the JOG button.
2Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3Move to Eye Saver Mode controlling the JOG button UP/DOWN and press the JOG button. The following screen will appear.
Picture |
|
| Set to an optimum |
| Off |
| |
Eye Saver Mode |
| picture quality | |
| On | 10075 | suitable for eye |
Game Mode | relaxation. | ||
Response Time |
| 60 |
|
Picture Size |
| Wide50 |
|
Screen Adjustment |
| 50 |
|
|
| 2200 |
|
|
| 0 |
|
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
3 Screen Setup 46