Adjusting the LCD Display
•The preset password for the LCD Display is "000000".
•The server program's
Please make sure not to use the
•In the OSD image of MagicInfo, Network mode is the same as Device.
•When using MagicInfo with the
•When using MagicInfo with the device directly connected to LCD Display : execute Device mode.
•Press ESC to directly go to the MagicInfo Window screen.
•To setup MagicInfo on a Windows screen, a keyboard and mouse are required.
•To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help. It is highly recommended not to turn off the AC power during an operation.
•For pivoted LCD Displays, ticker transparency is not supported.
•For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies.
•For drive D:, EWF is not applied.
•When the contents of Setup have been changed when EWF is in the Enable state, to save the changes in the disk, you must Commit them.
•By selecting Disable, Enable or Commit, the system is restarted.
Note
When the temperature is lower than 5°, the MagicInfo warming up OSD message is displayed on the screen and heating device
MagicInfo
1.Select MagicInfo in the Source List menu.
2.The MUI Install screen appears. Select the language you want to use.
3.Press the Install button.