Info Grid shows some basic information necessary to Settings Control.
When each function is selected, the set value of the selected function is displayed in the slide.When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM."
1)Picture
-Available only for TV, AV,
2)Contrast
-Adjusts Contrast of the selected display.
3)Brightness
-Adjusts Brightness of the selected display.
4)Sharpness
-Adjusts Sharpness of the selected display.
5)Color
-Adjusts Color of the selected display.
6)Tint
-Adjusts Tint of the selected display.
-Available only for NT.
7)Color Tone
-Adjusts the Color Tone for the selected display.
8)Color Temp
-Adjusts the Color Temp for the selected display.
9)Brightness Sensor
-Adjusts the Brightness Sensor for the selected display.
10)Dynamic Contrast
-Adjusts the Dynamic Contrast for the selected display.
The Input source of MagicInfo works only on MagicInfo model.
Color Temp is only enabled if the Color Tone is set to Off.
The Input source of TV works only on TV model.
This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed.
Settings