Samsung LF24FT2WFPZXCI, LF24TC2WAN/EN, LF24FT2WFPZXEN manual Networked standby mode, 4th Jan

1. Networked standby mode

1.1Test result where all NTW wired ports are connected and all NTW wireless ports activated ( This value could exceed requirement limit )

Test date

4th Jan. 2016

Power Consumption (W)

(rounded to the 1st decimal place)

5.3

1.2 The number and type of network ports ( it shall be declared if the same physical network port accommodates two or more types of network ports )

Logical Ports: 1 x Ethernet (100BaseT) (Position : Rear side of equipment)

Physical Ports: 1 x Ethernet

1.3Test result and information for each type of network port:

(a)The ( maximum ) power consumption

(b)The default time after which the power management function, or a similar function, switches the equipment into a condition providing networked standby

(c)The trigger that is used to reactivate the equipment

(d)The ( maximum ) performance specifications

(e)The communication protocol used by the equipment

	NTW Port	(a), W			(b), min			(c)	(d)		(e)
	Ethernet		1.6		N/A		IP traffic / ICMP ping		100 Mbps	Ethernet protocol
-			-	-				-	-		-
-			-	-				-	-		-
-			-	-				-	-		-
-			-	-				-	-		-
1.3 Test parameters
	parameters				Actual		Limit	parameters		Actual		Limit
	Ambient temperature ( )			26.0		23±5		Test voltage (V)		230	230±2.3
	Test frequency (Hz)		℃	50		50±0.5		Total harmonic	distortion	1.42	2
								(%)
	Crest factor			1.40		1.34~1.49		-		-		-

1.5 Whether all network ports are deactivated before delivery

Not all network ports are deactivated before delivery

1.6 Whether the equipment qualifies as HiNA equipment or equipment with HiNA functionality ( where no information is provided, this is considered not to be the case )

N/A

1.7 Instrumentation

Test instruments which were used in the test are as follows;

2