Samsung DV18MSTAN/EDC, 800TFT, LSA800SN/XEG, DV18MSPAN/EDC, DV18MSPAS/EDC manual Menu Adjustments

Adjusting Your FPD

Table 1. Menu Adjustments

Icon	Settings and	Description
	Sub-menus
	Image Lock:	The Fine and Coarse adjustments allow you to more
	• Fine	closely adjust your FPD to your preference.
	• Coarse	Use the “–” (	) and “+” (		) buttons to adjust away
		the interference. If satisfactory results are not
		obtained using the Fine adjustment, use the Coarse
		adjustment and then use Fine again. This function may
		change the width and centering of the display image.
		Use the Horizontal function on the Position menu to
		center the display image on the screen.
	• Auto	Select this icon to adjust for and limit the amount of
	Adjustment	noise visible in the displayed image which can appear
		as horizontal lines or areas on the screen where the
		image is unstable and jitters or shimmers.
		Auto Adjustment allows the FPD to self-adjust to the
		incoming video signal. After using Auto Adjustment
		you can further tune your FPD to your liking using the
		Fine and Coarse adjustments.
		Caution: Using Auto Adjustment will cause any
		stored user settings to be overwritten.
	Position :	Select this icon to move the viewing area on the FPD
	• Horizontal	screen. Use the “–” (		) and “+” (			) buttons to move
	• Vertical	the viewing area to the left or right when Horizontal is
		selected and up and down when Vertical is selected.
	Color Control:	Select this icon to adjust the color hue and saturation.
	• R(ed)	The color hue is most noticeable in areas of white.
	• G(reen)	Use the “–” (	) button to decrease the amount of the
	• B(lue)	selected color. Use the “+” (				) button to increase the
		amount of the selected color.

12