Power adapter cable holder slot

Samsung LSA800SN/XEF, 800TFT, DV18MSTAN Power adapter cable holder slot, Kensington security slots

Page 6

Power adapter connector Connect the power adapter jack here.

15-pin, mini D-sub signal cable connector Connect a computer system to this connector.

Figure 2. Back panel connectors

3	13W3 signal cable connector
3	Connect a 13W3 cable (Optional) from the video connector on your workstation to this
	connector.
4	Power adapter cable holder slot
4	The plastic cable holder ﬁts into this slot to protect the power adapter jack from being
	inadvertently dislodged. To disconnect the power adapter, turn the plastic holder 1/4
	turn to the left or right and pull the holder out of the cabinet.
5	Kensington security slots
5	This FPD offers you the opportunity to attach a Kensington-type security device in two
	different locations; on the panel cabinet or on the tower stand. Please note that the
	location on the panel cabinet is more secure than the one on the tower stand.
	Kensington lock not included. Refer to your locking device documentation for
	installation instructions.
6	USB hub receptacle
6	You may install a self-powered USB hub in this slot. Remove the cover to reveal the

available space.

Image 6

Contents

SyncMaster 800TFT Unpacking your Monitor Contents Portu- Italiano Español Deutsch Français EnglishPage Your Flat Panel Monitor Front panelPower adapter cable holder slot Kensington security slotsUSB hub receptacle Installation Getting Help Auto AdjustmentMaintenance of Your Flat Panel Display Plug and PlayTurn off both your computer and the monitor Self-Test Feature Check StfcCheck Signal Cable Turn on the monitorMenu button Adjusting Your FPDPower button and indicator ButtonsDirect-Access Features Automatic SaveButton to increase OSM Lock/UnlockOr + ContrastMenu System Main function menuPush the Exit button 1 or 2 times to exit from the OSM Menu Adjustments Expand To their original factory settingsButton. The default time is 10 seconds PuterSee more detail New settingSoftware you are using NizeNormal Power-Saving Function mode EPA/NUTEK State Operation PowerSaverPower-saving modes Sleep ModeTroubleshooting Troubleshooting problemsSymptom Corrective Actions ﬂat panel display is saving your changes Speciﬁcations Referring to Standard signal modes,Appendix SpeciﬁcationsW3 Connector Pin D-SUB connector Pin NoPin Assignments Preset timing modes Display ModesRemove the four screws, securing the stand and remove it Turn off your monitor and unplug its power cordChanging the Stand Rear cover Mounting Interface PadIndex Index-1User Instructions User InformationDeclaration of conformity for products Marked with FCC Logo Germany

Related manuals