![](/images/new-backgrounds/1239401/23940177x1.webp)
2Using "HUB Monitor"
LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”), select Properties → Internet Protocol Version 4 (TCP/IPv4) → Properties, and configure the static IP and DNS settings.
5After configuring the IP, click OK. The following message will appear.
A static IP must be allotted to only one network device. The following message will appear if the same static IP is allotted to the network devices of both the notebook PC and HUB Monitor. (Ensure the network device that is not in use is set to Do not use.)
Select No in the message window.
To use the notebook PC’s LAN network, set the HUB Monitor’s network to Do not use and the notebook PC’s network device to Use. Next, configure the IP settings.
6Click Close.